Hi Ron,
Thank you very much for the feedback. I use the same input on my old computer running V6.0 and (identical converted fdb) on the new computer running V7.5. Operations complete in a few seconds on V6.0 and hundreds of relationship are identified. So there are no loops in the file. And yes there is plenty of activity in the computer ; Legacy issues over 30 000 000 000 bytes in i/o operations while doing the relationship calculations. In the meantime, I received a message from Jim, Technical Support, Legacy Family Tree, stating that : This problem has been reported by other users. It was logged for the programmers' attention as issue 3699 "Incomplete relationship calculations." A future update may contain the solution. I regret that I do not have a work-around for it. Thank you for taking the time to report this problem. Your efforts will help improve Legacy and make it a better program. I am pretty sure they will eventually figure out what is going on but, I have no choice, I am going back to V6. I held back several months before going to V7.5, especially to avoid this kind of unfortunate problems. Just whish the Legacy team would make available a list of known bugs (or known issues) before they let us convert. Thanks again Ron, Sincerely, Jacques -----Original Message----- From: Ron Taylor [mailto:[email protected]] Sent: 9 juillet 2012 17:01 To: [email protected] Subject: Re: [LegacyUG] Relationship calculator and Set Relationships do not complete I have over 230,000 in my main Legacy database and I "set relationships" regularly for different people in the file. Works fine. Perhaps you have a few people with circular relationships (they are their own descendant). I usually set the non-blood relationships to zero and the blood relationships to 5. It takes about 2 minutes and 35 seconds. While working the counter shows just above the "Set Relationships" button. Does your counter show any activity or is it stalled at some point? Ron Taylor --- On Mon, 7/9/12, Sherry/Support <[email protected]> wrote: > From: Sherry/Support <[email protected]> > Subject: Re: [LegacyUG] Relationship calculator and Set Relationships do not complete > To: [email protected] > Date: Monday, July 9, 2012, 1:11 PM > You might check to see how many > relationships you have selected to calcuate > > 10 is generally more than sufficient for blood and 5 for > non-blood > unless you have a lot of royals or other intermingled > marriages. > > Too many relationships in the selection can slow the process > down. > > Also, back up the Family File (File > Backup Family File) > and run File > > FIle Maintenance > Check/Repair before setting or > calculating the > relationships. > > > Sincerely, > Sherry > Technical Support > Legacy Family Tree > > > On Mon, Jul 9, 2012 at 11:26 AM, Jacques E Decarie <[email protected]> > wrote: > > Four weeks ago, I converted from V 6.0 Deluxe to 7.5 > Deluxe. My main > > database contains over 270 000 individuals. The > relationship SET and > > CALCULTE never complete in V7.5 (even after 30 > minutes). In the last 4 > > weeks, I have made over 780 modifications to my > database. I need to know if > > Legacy 7.5 can handle relationships or not before I go > on. I don't mind > > going back to V 6.0.0.190 and retyping my 780 records > but I need to know now > > if that is what I have to do. > > > > Any help and comments from users with similar > experience would be greatly > > appreciated. Thanks. Jacques. > > > > Legacy User Group guidelines: > http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages after Nov. 21 2009: > http://www.mail-archive.com/[email protected]/ > Archived messages from old mail server - before Nov. 21 > 2009: > http://www.mail-archive.com/[email protected]/ > Online technical support: http://www.LegacyFamilyTree.com/Help.asp > Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) > and on our blog (http://news.LegacyFamilyTree.com). > To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp > > > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/[email protected]/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/[email protected]/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/[email protected]/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/[email protected]/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
