NewerTech G3 upgrade for PowerMac 7100/8100
MAXPowr G3 PDS
240/160Mhz Upgrade
PowerMac 7100/8100
P/N:7MXP+71/81
Has video card pass through (all original hardware included).
More info from another listmember:
Also works in 9150/80 and 9150/120 servers, which is perhaps
its best use.
Just the G3 card itself works on the 9150s as the PDS is on
the wrong side of the NuBus slots to accommodate HPV
pass-through.
In the 9150 application, the best bet is a Supermac video
card. With the ROM upgrade to the Supermac, these will work
in 68K or PPC Macs, including a 68K Mac which has been
upgraded with the NewerTech G3 card.
There were quite a few of these, so perhaps you could repost
with its speed (220 MHz and every 20 MHz above 220 to about
300 MHz were common), and whether, or not, the card has the
"pass-through" feature for the HPV video card, and if it has
the pass-through flat cable and the card cage for holding
the HPV.
$15 + shipping
Jeff Wechter
Minneapolis, MN 55419
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to LEM-Swap.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
LEM-Swap is for buying & selling Mac stuff. It is not a discussion list. Reply
to the person who made the original posting, never to the list.
Software piracy is illegal and not allowed on LEM-Swap. Except for software
originally provided with computers, no software is to be left on hard drives
(other than freeware) unless the original installer and password are included.
Shipments valued at US$100 or more should be insured, and shipments valued at
US$25 or more should be shipped so they can be tracked.
See the list FAQ - http://lowendmac.com/lists/swap.html - for guidelines on
postings, feedback, and dispute resolution. Seller feedback at
http://groups.google.com/group/swap-feedback
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---
