I was working on a deal to buy two of these from a fellow LEM swapper, but he disappeared. Maybe the CIA inducted him into its waterboarding program. Anyway, this is a 3.5-inch hard drive. The one I have says it was made in 2003. The Maxtor part number is 6Y080P0422211. I prefer one...or two... that work, but will take one or two that work but have bad sectors.
What I'm after is a good interface/bridge board so I can attempt to extract the data off one that was working when stored but went pfffft, quite stinkily, when plugged in after a long siesta. The third-largest chip on mine, the SMOOTH chip, now has two little burn holes where an internal short occurred. Help, anyone? Jim Scott Eureka, CA 95503 --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to LEM-Swap. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] LEM-Swap is for buying & selling Mac stuff. It is not a discussion list. Reply to the person who made the original posting, never to the list. Software piracy is illegal and not allowed on LEM-Swap. Except for software originally provided with computers, no software is to be left on hard drives (other than freeware) unless the original installer and password are included. Shipments valued at US$100 or more should be insured, and shipments valued at US$25 or more should be shipped so they can be tracked. See the list FAQ - http://lowendmac.com/lists/swap.html - for guidelines on postings, feedback, and dispute resolution. Seller feedback at http://groups.google.com/group/swap-feedback Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
