This is a 5.25" dual-bay enclosure with both Firewire 400/USB 2.0 to IDE interfaces. It measures 13" x 7" x 6.5" and operates on AC power. Each bay has two Firewire 400 ports, which makes daisy-chaining possible, plus each bay has a USB 2.0 port. The two bays can accept optical drives, hard drives, etc.
Right now there are IDE 133 trays installed and they will be included. These trays hold IDE hard drives and I used to use the hard drives to back up via Retrospect. I also used the setup to recover data from IDE drives. It was able to boot a number of Mac systems from the device when I used the FW400 interface. I never tried booting via USB, so I'm not sure if that would work on an Intel system. Note that although these bays have both Firewire 400 and USB 2.0 interfaces, only one interface can be used at a time. This enclosure does *not* bridge the Firewire 400 and USB 2.0 interfaces. I can send photos on request. $60 shipped in the US. Bill Lozito Victoria, MN 55386 -- You received this message because you are a member of the LEM Swap group. To post to this group, send email to [email protected] To unsubscribe, send an email *from your subscribed address* to [email protected] LEM-Swap is not a discussion list; it is for buying & selling Mac stuff. Reply directly to the person who posted, never to the list. Software piracy is illegal and not allowed on LEM Swap. Except for freeware and software originally provided with computers, no software is to be left on hard drives unless the original installer (not a burned copy) is included, along with any required registration number, password, etc. Shipments valued at US$100 or more should be insured, and shipments valued at US$25 or more should be shipped so they can be tracked. See the list FAQ http://lowendmac.com/lists/swap.html for guidelines on postings, feedback, and dispute resolution. Seller feedback at http://groups.google.com/group/swap-feedback
