I have a 12" iBook G3 Dual USB: 600 MHz, 384 MB RAM, Airport, DVD-ROM,
40GB hard drive. Battery says it has 3.8Ah charge capacity and 182
cycles; I did not try to run it down. I'm running Tiger on it without
problems.

Now the negative:
- The sleep light connector on the motherboard is broken, so there's
no sleep light.
- It goes to sleep when the lid is closed to about 90-100 degrees -
never had a problem with the lid open to 135 degrees or more. If it
happens, I close the lid and reopen wide and it's back.
- All 4 rubber feet on the bottom are gone (including the battery).
- The rubber bumpers between the lid and the body are missing and were
replaced by simple clear alternatives.
- There is a thin scratch in the LCD, about 1" long, 3"up and 1" in
from the bottom right corner. I judge it very minor, visible but not
intrusive.
- The power supply (Apple 65W) has been patched where the 24V cord
exits the power pack. You see a gob of epoxy covering the exit opening
and 1" of the cord around the patch. It works fine.

I am asking for $90 shipped in CONUS from

Yishai Sered
Newton, MA 02459

-- 
You received this message because you are a member of the LEM Swap group.
To post to this group, send email to [email protected]
To unsubscribe, send an email *from your subscribed address* to 
[email protected]
LEM-Swap is not a discussion list; it is for buying & selling Mac stuff. Reply 
directly to the person who posted, never to the list.
Software piracy is illegal and not allowed on LEM Swap. Except for freeware and 
software originally provided with computers, no software is to be left on hard 
drives unless the original installer (not a burned copy) is included, along 
with any required registration number, password, etc.
Shipments valued at US$100 or more should be insured, and shipments valued at 
US$25 or more should be shipped so they can be tracked.
See the list FAQ http://lowendmac.com/lists/swap.html for guidelines on 
postings, feedback, and dispute resolution. Seller feedback at 
http://groups.google.com/group/swap-feedback

Reply via email to