This was a working *pull*. I have upgraded to USB 3.0 so this case is surplus.
The inputs for this case is 1 USB 2.0 Type B plug and 2 FireWire 400 male plugs This case holds a 3.5" SATA hard drive. It has an included power supply (12 volt, 2 amp) with a standard 120 volt 2 prong wall plug. The case has an on/off power switch and a torque fit stand so it can stand vertically, or it can sit flat on its long side. Opening the case is simple with removing two Phillips head screw. The hard drive is secured to the case with 4 Phillips screws. The screws are included with the case. $35.00 plus shipping to continental US. PayPal required. Richard Smallwood Huntsville AL 35801 -- You received this message because you are a member of the LEM Swap group. To post to this group, send email to [email protected] To unsubscribe, send an email *from your subscribed address* to [email protected] LEM-Swap is not a discussion list; it is for buying & selling Mac stuff. Reply directly to the person who posted, never to the list. Software piracy is illegal and not allowed on LEM Swap. Except for freeware and software originally provided with computers, no software is to be left on hard drives unless the original installer (not a burned copy) is included, along with any required registration number, password, etc. Shipments valued at US$100 or more should be insured, and shipments valued at US$25 or more should be shipped so they can be tracked. See the list FAQ http://lowendmac.com/2014/lem-swap/ for guidelines on postings, feedback, and dispute resolution. Seller feedback at http://groups.google.com/group/swap-feedback --- You received this message because you are subscribed to the Google Groups "LEM Swap" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/lemswap/842F6452-4B4C-4A72-8178-AE0870A422F3%40knology.net.
