Hi, Viktor,
I don't think you need to open an issue on Github since I plan to keep
working on the problem after Leo 6.3 Final is released. In the meantime,
once you get a layout that you like, I suggest saving it using the splitter
bar context menu. After a restart you can load that named layout using the
context menu, and things should go back the way you want.
You could make it even easier by creating a button to run the
vr3-use-default-layout command. The button body would be -
c.k.simulateCommand('vr3-use-default-layout')
I have done this myself, but don't need to use it very often.
This has been one of those pesky problems that are hard to pin down. I
have put in quite a few hours with the VR3 code and the Leo code, and still
it's not fully cleared up. Now that I know it's still a problem for you,
I'll get back to work on it.
On Tuesday, October 27, 2020 at 3:32:37 PM UTC-4, Viktor Ransmayr wrote:
>
> Hello Thomas,
>
> [email protected] schrieb am Dienstag, 27. Oktober 2020 um 19:01:05 UTC+1:
>
>> ...
>>
>> I have not seen the VR3 pane show up at the left nor under the body pane,
>> but it probably has the same cause. To help with recovery, I added a new
>> command, and you should try it out:
>>
>> <ALT-x>vr3-use-default-layout
>>
>> This should put the VR3 pane to the right of the body pane, which should
>> be to the right of the outline pane, no matter what incorrect layout had
>> come about. This layout should be stable when VR3 is toggled on and off
>> again. If this doesn't work for you, please post the actual behavior and
>> I'll try to come up with a way to make it work as intended.
>>
>
> Yes, this resulted temporarily in the expected layout ...
>
> However the expected layout does not persist a restart of Leo, even if I
> set "@string initial-split-orientation = horizontal" - and - even if I
> delete ~/.leo/db before restarting Leo 6.3 b1 :-(
>
> Shall I create an issue in GitHub?
>
> In any case: Thanks a lot for your help & quick response!
>
> With kind regards,
>
> Viktor
>
>
--
You received this message because you are subscribed to the Google Groups
"leo-editor" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/leo-editor/73dc7762-db78-44fb-b13b-9842e4ec535bo%40googlegroups.com.
