Randy McMurchy wrote:
[EMAIL PROTECTED] wrote these words on 08/15/05 19:08 CST:
[from LFS-Support, please direct all replies to BLFS-Support]
It was suggested this belongs in BLFS support. I don't want to ignore
etiquette and I'll post there in the future. However, as I've received
replies I'll continue this thread for now.
Continuing to post on LFS-Support *is* ignoring etiquette. I'm moving
the thread where it belongs.
I increased volume and turned on everything but still no sound. I
thought perhaps a reboot was necessary but that also produced no sound.
I brought up alsamixer again and was surprised to find that everything
was set to zero volume and muted again.
There were changes made to the dev.d handler that restores the settings.
I believe it did not work for me either, last time I booted using the
new dev.d handler.
Keep in mind, that all you have to do is a 'alsactl restore' to put the
settings back (provided they were saved).
Any suggestions? I see the sound card recognized upon booting. I've
obviously made progress with everyone's help.
What does speaker-test when run as root do?
Please show the output from 'cat /proc/asound/devices' and
'cat /proc/asound/cards'.
speaker-test produces a loud beep and shows the following:
Playback device is plughw:0,0
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size rate from 8 to 16384
Period size rate from 8 to 16384
Buffer time size 2525
To choose buffer_size=2520
To choose period_size=315
was set period_size=315
was set buffer_size=2520
- Front left
/proc/asound/devices and /proc/asound/cards show the following respectively:
0: [0- 0]: ctl
25: [0- 1]: digital audio capture
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
33: : timer
0 [I440MX ]: ICH - Intel 440MX
Intel 440MX with CS4299 at 0x2000, irq 11
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/lfs/faq.html
Unsubscribe: See the above information page
