Hi,
I am working on lfs-6.1.1 installed from LFS-BOOK-SVN-20051127. The system
is Compaq Presario P-III laptop.
I have IBM 1GB Microdrive mounted at the usb port through SanDisk adapter.
I have enabled the necessary 'usb storage' etc in the booting kernel-2.6.14.
The microdrive is not detected in the /dev either as 'hdb' or as 'sda'. I
want to install the latest 'lfs-svn' on the microdrive but unless it is
detected, I cannot do anything.
The SanDisk is detected by the system. Extracts from sys.log is as given
below. I am not able to decipher its meanings.
Mar 5 21:44:58 lfs kernel: usb-storage: queuecommand called
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread awakened.
Mar 5 21:44:58 lfs kernel: usb-storage: Command INQUIRY (6 bytes)
Mar 5 21:44:58 lfs kernel: usb-storage: 12 00 00 00 24 00
Mar 5 21:44:58 lfs kernel: usb-storage: Bulk Command S 0x43425355 T 0x1 L
36 F 128 Trg 0 LUN 0 CL 6
Mar 5 21:44:58 lfs kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31
bytes
Mar 5 21:44:58 lfs kernel: usb-storage: Status code 0; transferred 31/31
Mar 5 21:44:58 lfs kernel: usb-storage: -- transfer complete
Mar 5 21:44:58 lfs kernel: usb-storage: Bulk command transfer result=0
Mar 5 21:44:58 lfs kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer
36 bytes, 1 entries
Mar 5 21:44:58 lfs kernel: usb-storage: Status code 0; transferred 36/36
Mar 5 21:44:58 lfs kernel: usb-storage: -- transfer complete
Mar 5 21:44:58 lfs kernel: usb-storage: Bulk data transfer result 0x0
Mar 5 21:44:58 lfs kernel: usb-storage: Attempting to get CSW...
Mar 5 21:44:58 lfs kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13
bytes
Mar 5 21:44:58 lfs kernel: usb-storage: Status code 0; transferred 13/13
Mar 5 21:44:58 lfs kernel: usb-storage: -- transfer complete
Mar 5 21:44:58 lfs kernel: usb-storage: Bulk status result = 0
Mar 5 21:44:58 lfs kernel: usb-storage: Bulk Status S 0x53425355 T 0x1 R 0
Stat 0x0
Mar 5 21:44:58 lfs kernel: usb-storage: scsi cmd done, result=0x0
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread sleeping.
Mar 5 21:44:58 lfs kernel: Vendor: SanDisk Model: ImageMate II
Rev: 1.30
Mar 5 21:44:58 lfs kernel: Type: Direct-Access
ANSI SCSI revision: 02
Mar 5 21:44:58 lfs kernel: Attached scsi generic sg0 at scsi0, channel 0,
id 0, lun 0, type 0
Mar 5 21:44:58 lfs kernel: usb-storage: queuecommand called
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread awakened.
Mar 5 21:44:58 lfs kernel: usb-storage: Bad target number (1:0)
Mar 5 21:44:58 lfs kernel: usb-storage: scsi cmd done, result=0x40000
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread sleeping.
Mar 5 21:44:58 lfs kernel: usb-storage: queuecommand called
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread awakened.
Mar 5 21:44:58 lfs kernel: usb-storage: Bad target number (2:0)
Mar 5 21:44:58 lfs kernel: usb-storage: scsi cmd done, result=0x40000
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread sleeping.
Mar 5 21:44:58 lfs kernel: usb-storage: queuecommand called
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread awakened.
Mar 5 21:44:58 lfs kernel: usb-storage: Bad target number (3:0)
Mar 5 21:44:58 lfs kernel: usb-storage: scsi cmd done, result=0x40000
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread sleeping.
Mar 5 21:44:58 lfs kernel: usb-storage: queuecommand called
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread awakened.
Mar 5 21:44:58 lfs kernel: usb-storage: Bad target number (4:0)
Mar 5 21:44:58 lfs kernel: usb-storage: scsi cmd done, result=0x40000
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread sleeping.
Mar 5 21:44:58 lfs kernel: usb-storage: queuecommand called
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread awakened.
Mar 5 21:44:58 lfs kernel: usb-storage: Bad target number (5:0)
Mar 5 21:44:58 lfs kernel: usb-storage: scsi cmd done, result=0x40000
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread sleeping.
Mar 5 21:44:58 lfs kernel: usb-storage: queuecommand called
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread awakened.
Mar 5 21:44:58 lfs kernel: usb-storage: Bad target number (6:0)
Mar 5 21:44:58 lfs kernel: usb-storage: scsi cmd done, result=0x40000
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread sleeping.
Mar 5 21:44:58 lfs kernel: usb-storage: queuecommand called
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread awakened.
Mar 5 21:44:58 lfs kernel: usb-storage: Bad target number (7:0)
Mar 5 21:44:58 lfs kernel: usb-storage: scsi cmd done, result=0x40000
Mar 5 21:44:58 lfs kernel: usb-storage: *** thread sleeping.
The 'cat /proc/scsi/usb-storage/0' command produces the following result:
[EMAIL PROTECTED]:~$ cat /proc/scsi/usb-storage/0
Host scsi0: usb-storage
Vendor: SanDisk Corporation
Product: ImageMate CompactFlash USB
Serial Number: 000000000003
Protocol: Transparent SCSI
Transport: Bulk
Quirks:
The 'cat /proc/scsi/scsi' command produces the following:
[EMAIL PROTECTED]:~$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SanDisk Model: ImageMate II Rev: 1.30
Type: Direct-Access ANSI SCSI revision: 02
I am looking for clues to solve this problem. Help is most welcome.
thanks.
RSP
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/lfs/faq.html
Unsubscribe: See the above information page
