Spahn, Daniel schrieb:
> Correction!
> I read a little more carefully. You have not compiled the correct
> drivers for your SCSI hard drive into the kernel. You can run lspci,
> then make menuconfig (In a different terminal) and match up the SCSI
> drive characteristics with a driver, most likely in the SCSI section of
> Device Drivers.
> This line here:
> [ 13.472000] 0300 4194302 hda driver : ide-cdrom
i guess it's not really scsi but sata, thus sata and the intel driver
must be enabled in the kernel. built-in <*>, not modlue <M>
i suggest to use the "intel pata" for your cd/dvd, not the old ata
thus you'll get no more /dev/hdX but you'll find your cd/dvd as /dev/sr0
with a link on /dev/cdrom, and your disk on /dev/sda
with kernel 2.6.26.1 (the one i have access right now):
device drivers
SCSI device support
<*> SCSI Disk
<*> SCSI CDROM
[ ] SCSI low-level drivers
< > ata/atapi/mfm/rll
<*> serial ata (proc) and parallel ata
[*] ata acpi support
[*] ata sff support
<*> intel esb, ich, piix3...
<*> intel pata mpiix
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/lfs/faq.html
Unsubscribe: See the above information page
