Hi Simone,
If you try a "ip link" - do you get anything else other than:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
If you do, and it contains a ethX adaptor, you need to edit the
following file:
/etc/udev/rules.d/70-persistent-net.rules
Delete any entries which contains ethX interfaces.
Then reboot - and the system should configure you nic as eth0.
Best Regards
Michael
Simone Dalmasso wrote:
> Hi list I've finally built my LFS and it works. Just one issue, while
> booting I get a Warn: "Interface eth0 doesn't exist" and when shutting
> down I also get "Device eth0 doesn' exist"
> I tried to recompile the kernel doing a make clean and then activating
> the network driver for AMD Pcnet32 (got with lspci from LiveCd) in
> the kernel gui.
> But nothing changes. I'm working under a virtual machine (VMWare Fusion).
> Can you help me? Thanks.
>
> Simone
>
>
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/lfs/faq.html
Unsubscribe: See the above information page
