John Black wrote:
> -------------
> root:/sys/class/net# dmesg|grep eth0
> [ 2.611331] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0xfdffe000,
> 00:e0:4d:56:48:0a, IRQ 23
> [ 2.612057] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1,
> status 0x7849 advertising 01e1 Link 0000
> [ 20.191794] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 24.662664] via-rhine 0000:00:12.0: eth0: link down
> [ 24.663638] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 24.669753] ADDRCONF(NETDEV_UP): eth0: link is not ready
> root:/sys/class/net#
> -------------
> My main purpose is creating Live CD with some unicodes support,
> should I consider something about USB modem?
Do you have the via-rhine driver built into the kernel?
Device Drivers ->
Network device support ->
Ethernet driver support ->
VIA Devices
VIA Rhine support
I'm not really familiar with USB modems. I haven't used a modem in 10
years. However the VIA site indicates a PCI network card.
On the host, you can try
lspci|grep -i network
lsusb|grep -i network
-- Bruce
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/lfs/faq.html
Unsubscribe: See the above information page
