Le 01/07/2013 17:28, William K Helbig Jr a écrit :
> Hello all,
>
> I have followed the book all the way to the end, and now have a working
> system, sort of. I am able to boot and log into LFS-7.3. It is of course
> a bare, minimal system but it does seem to be functional. There is one
> problem however. Approximately every 60 seconds the mouse is
> disconnected then immediately reconnected. A sample of the console log is:
>
> [...] usb 1-8.2.2.2: USB disconnect, device number 25
> [...] usb 1-8.2.2.2: new low-speed USB device number 26 using ehci-pci
> [...] usb 1-8.2.2.2: New USB device found, idVendor=046D, isProduct=c05a
> [...] usb 1-8.2.2.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber-0
> [...] usb 1-8.2.2.2: Product: USB Optical Mouse
> [...] usb 1-8.2.2.2: Manufacurer: Logiech
> [...] usb 1-8.2.2.2: Input: Logiech USB Optical Mouse as
> /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.2/1-8.2.2/1-8.2.2.2/1-8.2.2.2:1.0/input/input32
> [...] usb 1-8.2.2.2: Hid-generic 0003:046D:C05A.001A: input,hidraw0: USB
> HID v1.11 Mouse [Logitech USB Optical Mouse] on
> usb-0000:00:1d.7-8.2.2.2/input0
>
> This occurs both before and after I login. What I have noticed is the
> device number and Hid-generic value increments by 1 each time. The next
> iteration of the above is
>
> ... USB disconnect, device number 26
> ... new low-speed USB device number 27 using ehci-pci
> ...
> ... usb 1-8.2.2.2: Hid-generic 0003:046D:C05A.001B: ... /input0
>
> The hardware is a Dell Latitude D620 laptop in a docking station with
> both the mouse and (USB) keyboard connected to the docking station. The
> keyboard appears to be functioning correctly.
>
> Skip H
I have had the same issue with an HP mouse connected to a USB port on a 
desktop machine, while there is no such thing with a microsoft mouse. 
So, seems mouse-dependent. If you have a spre mouse, then give it a try.

Pierre



-- 
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/lfs/faq.html
Unsubscribe: See the above information page

Reply via email to