So partitionning correctly another disk, dd source to dest to copy all
partitions and install grub again fixed the issue.
I am now able to boot on my lfs disk.

Quick note, although the support on the mailing list is great, it wouldn't
hurt to tell people who makes a separate /boot partition to have another
partition of 1M for grub.
I installed arch before (uefi) and i actually had no idea.
The book itself is a very good detailled tutorial with lots of explanation
but imo if you cannot boot your lfs there is no point.

Have a great day folks and thanks for all the support o/

ps : I use basic gmail for my mail, i know it is terrible and induce lots
of top posting (had to set things to be able to quote) but i wasn't aware
it did quotes terribly. If you have any advise for a good mailer i will
gladly take it.

2016-06-29 11:16 GMT+02:00 thibaut noah <[email protected]>:

>
>
> 2016-06-29 9:39 GMT+02:00 akhiezer <[email protected]>:
>
> For example, if:
>> --
>> * you have two separate physical disks;
>>
>> * and your debian (without any ~unusual remappings/&c) sees them as sda
>>   (for disk1) & sdb (for disk2);
>>
>> * and you don't change the physical connections of the disks to the
>>  computer;
>>
>> * then your lfs should see the same sda (for disk1) & sdb (for disk2)
>>   - again, without any ~unusual remappings/&c.
>> --
>>
> They are both virtual disks and i am trying to run sdb alone (by creating
> another virtual machine with just sdb as a virtual disk).
>
>>
>> Paste the three pastebin contents into your message - not least as
>> they'll be short-enough.
>>
>
> Thought they were too long, my bad.
>
> Please note that my fstab and my grub file have been made with the
> assumption that by having one disk only sdb would become sda on the new
> virtual machine.
>
> fstab :
>
>
>    1. /dev/sda1     /            ext4   defaults            1     1
>    2. /dev/sda2     swap         swap     pri=1               0     0
>    3. /dev/sda3     /boot        ext2   defaults            1     1
>    4. proc           /proc        proc     nosuid,noexec,nodev 0     0
>    5. sysfs          /sys         sysfs    nosuid,noexec,nodev 0     0
>    6. devpts         /dev/pts     devpts   gid=5,mode=620      0     0
>    7. tmpfs          /run         tmpfs    defaults            0     0
>    8. devtmpfs       /dev         devtmpfs mode=0755,nosuid    0     0
>
>
>
>>
>>
> grub.cfg :
>
>
>    1. # Begin /boot/grub/grub.cfg
>    2. set default=0
>    3. set timeout=5
>    4.
>    5. insmod ext2
>    6. set root=(hd0,3)
>    7.
>    8. menuentry "GNU/Linux, Linux 4.4.2-noah" {
>    9.         linux   /vmlinuz-4.4.2-tnoah root=/dev/sda1 ro
>    10. }
>
>
> fdisk -l :
>
> - Disk /dev/sda: 8 GiB, 8589934592 bytes, 16777216 sectors
> - Units: sectors of 1 * 512 = 512 bytes
> - Sector size (logical/physical): 512 bytes / 512 bytes
> - I/O size (minimum/optimal): 512 bytes / 512 bytes
> - Disklabel type: dos
> - Disk identifier: 0x5c2e89f5
> -
> - Device     Boot    Start      End  Sectors  Size Id Type
> - /dev/sda1  *        2048 15988735 15986688  7.6G 83 Linux
> - /dev/sda2       15990782 16775167   784386  383M  5 Extended
> - /dev/sda5       15990784 16775167   784384  383M 82 Linux swap / Solaris
> -
> - Disk /dev/sdb: 15 GiB, 16106127360 bytes, 31457280 sectors
> - Units: sectors of 1 * 512 = 512 bytes
> - Sector size (logical/physical): 512 bytes / 512 bytes
> - I/O size (minimum/optimal): 512 bytes / 512 bytes
> - Disklabel type: gpt
> - Disk identifier: F700B567-368F-4096-BB5B-6B2A5C670F10
> -
> - Device        Start      End  Sectors  Size Type
> - /dev/sdb1      2048 20973567 20971520   10G Linux filesystem
> - /dev/sdb2  20973568 29362175  8388608    4G Linux filesystem
> - /dev/sdb3  29362176 31457246  2095071 1023M BIOS boot
>
>
>>
>>
>>
>> --
>> --
>> http://lists.linuxfromscratch.org/listinfo/lfs-support
>> FAQ: http://www.linuxfromscratch.org/blfs/faq.html
>> Unsubscribe: See the above information page
>>
>> Do not top post on this list.
>>
>> A: Because it messes up the order in which people normally read text.
>> Q: Why is top-posting such a bad thing?
>> A: Top-posting.
>> Q: What is the most annoying thing in e-mail?
>>
>> http://en.wikipedia.org/wiki/Posting_style
>>
>
>
-- 
http://lists.linuxfromscratch.org/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page

Do not top post on this list.

A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?

http://en.wikipedia.org/wiki/Posting_style

Reply via email to