Not with the current camera design. The synchronous FIFO mode requires that the data source sync the writes with the ft2232H clk output. It will require a logic change to accommodate that. We are working on a future design that will do this, as the data rate required is much higher, but we'd like to retrofit the current design with a ft2232H, which means we need to use the async FIFO mode.
Async FIFO should have plenty of bandwidth (and it works well with windows). Dave > -----Original Message----- > From: Uwe Bonnes [mailto:[email protected]] > Sent: Friday, March 20, 2009 4:18 PM > To: [email protected] > Subject: RE: Release 0.15 and the ft2232 data loss. > > >>>>> "David" == David Challis <[email protected]> writes: > > David> Here is a some more information on my setup. On the camera > side, > David> we have a ft2232H, running a single channel in high speed > async > David> fifo mode. Data rate to the host is 800kbytes per second > max. > Any chance to use the synchronous fifi mode? > -- > Uwe Bonnes [email protected] > > Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt > --------- Tel. 06151 162516 -------- Fax. 06151 164321 ---------- > > -- > libftdi - see http://www.intra2net.com/en/developer/libftdi for > details. > To unsubscribe send a mail to > [email protected] -- libftdi - see http://www.intra2net.com/en/developer/libftdi for details. To unsubscribe send a mail to [email protected]
