alex wrote: > On Thu, Jun 4, 2009 at 6:06 AM, Paul Fox <[email protected]> wrote: > > i see in the archives that someone else was having trouble > > with interface A on a 4232. i'm using a mini-module. using > > the example bitbang_ft2232.c (substituting 6011 for 6001 for > > the device id), and also using a copy i've been modifying for > > my purposes, which only opens one interface, i can get success > > on interface B, but not on interface A. > > Hi Paul, what version of libftdi are you using? I've been able to > test the serial operation of all ports successfully by tying rx/tx > together. I haven't tried GPIO on interface A yet.
hi alex -- we seem to have two "pauls" with similar problems. my problem is described above, though i wasn't complete: i'm using one of the module's MPSSE blocks to drive a SPI interface. as i mentioned earlier, i'm using the 0.16 release, which is almost the same as current git. (unlike the other paul, i don't need more than one interface -- either of A or B will work for me, so i'm using B for now.) paul =--------------------- paul fox, [email protected] (arlington, ma, where it's 59.0 degrees) -- libftdi - see http://www.intra2net.com/en/developer/libftdi for details. To unsubscribe send a mail to [email protected]
