ok thanks, i guess i'll look into usbmon.
and yes this initial attempt is ordinary x86 stuff.. > From: [email protected] > To: [email protected] > Subject: RE: writing to FT245R > Date: Wed, 4 Nov 2009 18:50:42 -0600 > > Howard Coven wrote: > > >> As far as i know, I am doing anything to enable RD# , > >> do i need to do this? > > If it worked with d2xx, then I wouldn't necessarily change anything on the > device side. I just pulled that from glancing at the pin descriptions; I > have not used the FIFO-mode FTDI stuff before. I'm not sure what else to > say at this point. You might see if usbmon shows it going out, as I have > heard suggested on the libusb mailing list before (search the archives; I've > not used usbmon before). > > > > >> btw, the reason i'm trying to use the libftdi library rather than > libftd2xx.so is so > >> i can try to compile the code for a Gumstix processor . > > But this initial attempt is ordinary x86 stuff, right? > > > > Michael > > > > -- > libftdi - see http://www.intra2net.com/en/developer/libftdi for details. > To unsubscribe send a mail to [email protected] > _________________________________________________________________ Hotmail: Trusted email with Microsoft's powerful SPAM protection. http://clk.atdmt.com/GBL/go/177141664/direct/01/ http://clk.atdmt.com/GBL/go/177141664/direct/01/ -- libftdi - see http://www.intra2net.com/en/developer/libftdi for details. To unsubscribe send a mail to [email protected]
