Thanks DJ, I'm not certain if I did a power cycle after trying to configure the output, I'll give that a shot.
The fact I was able to reconfigure the other CBUS pins fine makes me think I was indeed power cycling, and perhaps my specific chip is shot. Do you have/use a breakout board for the FT232R, I'm thinking about buying a second one to help troubleshoot my problem, if yours is working, I'd probably go with that instead of another SparkFun board. Thanks! Chris On Tue, Jul 26, 2011 at 9:04 AM, DJ Delorie <[email protected]> wrote: > > I use CBUS a lot, and even have my own command-line tool for updating > the EEPROM bits for it. However, note that you need to power cycle > the FT232R after changing the eeprom for it to take effect. > > I've found that CBUS output "just works", and I use pins 2 and 3 like > you do. > > -- > libftdi - see http://www.intra2net.com/en/developer/libftdi for details. > To unsubscribe send a mail to [email protected] > > -- libftdi - see http://www.intra2net.com/en/developer/libftdi for details. To unsubscribe send a mail to [email protected]
