On Thu, Jun 20, 2013 at 5:49 PM, Anders Larsen <[email protected]> wrote:
> Hi, > > > On 2013-06-20 15:47, Ori Idan wrote: > >> On Thu, Jun 20, 2013 at 3:18 PM, Anders Larsen <[email protected]> wrote: >> >> > On 2013-06-20 13:01, Ori Idan wrote: >> > >> >> Where do I find the HEAD of ftdi_eeprom? >> >> I tried developer.intra2net..com and all I could find was sources of >> >> libftdi, after compilation it gave me ftdi_eeprom ver. 0.13 >> >> >> >> So how to I find the right sources and finally be able to read and >> write >> >> the EEPROM? >> >> >> > >> > in HEAD (and 1.0) ftdi_eeprom is included in the libftdi package. >> > >> > The download page is: >> > >> > http://www.intra2net.com/en/****developer/libftdi/download.php<http://www.intra2net.com/en/**developer/libftdi/download.php> >> **<http://www.intra2net.com/en/**developer/libftdi/download.php<http://www.intra2net.com/en/developer/libftdi/download.php> >> **> >> >> > >> > the source package of 1.0 is: >> > >> > http://www.intra2net.com/en/****developer/libftdi/download/**<http://www.intra2net.com/en/**developer/libftdi/download/**> >> > libftdi1-1.0.tar.bz2<http://**www.intra2net.com/en/** >> developer/libftdi/download/**libftdi1-1.0.tar.bz2<http://www.intra2net.com/en/developer/libftdi/download/libftdi1-1.0.tar.bz2> >> > >> >> > >> > and you can even follow the HEAD development in Git here: >> > http://developer.intra2net.****com/git/?p=libftdi;a=summary<h** >> ttp://developer.intra2net.com/**git/?p=libftdi;a=summary<http://developer.intra2net.com/git/?p=libftdi;a=summary> >> > >> >> > >> > This gives me version 0.17 of ftdi_eeprom while the Ubuntu system by >> default gives me version 0.3 >> > > correct, ftdi_eeprom 1.0 indeed presents itself as 0.17 ... (perhaps we > should update the version number ;-) > > > I tried it anyway and it does not work as well. >> > > To program the larger EEPROM of the FT4232 you must specify > eeprom_type=0x56 > in the configuration file of ftdi_eeprom. > > > I am probably doing something wrong. >> > > As we cannot see what you are doing, perhaps you could post the content of > your ftdi_eeprom configuration file? Thank you, it still does not work. I use the command: sudo ftdi_eeprom --read-eeprom example.conf I get EEPROM size: -1 Checksum Error: aaaa 0000 Malloc failed, aborting FTDI close: 0 I used the following configuration: vendor_id=0x0403 # Vendor ID product_id=0x6011 # Product ID eeprom_type=0x56 max_power=0 # Max. power consumption: value * 2 mA. Use 0 if self_powered = true. ########### # Strings # ########### manufacturer="LiveU" # Manufacturer product="USB Serial Converter" # Product serial="08-15" # Serial ########### # Options # ########### self_powered=true # Turn this off for bus powered remote_wakeup=false # Turn this on for remote wakeup feature use_serial=true # Use the serial number string # Normally out don't have to change one of these flags #BM_type_chip=true # Newer chips are all BM type in_is_isochronous=false # In Endpoint is Isochronous out_is_isochronous=false # Out Endpoint is Isochronous suspend_pull_downs=false # Enable suspend pull downs for lower power change_usb_version=false # Change USB Version usb_version=0x0200 # Only used when change_usb_version is enabled ######## # Misc # ######## filename="eeprom.new" # Filename, leave empty to skip file writing -- Ori Idan -- libftdi - see http://www.intra2net.com/en/developer/libftdi for details. To unsubscribe send a mail to [email protected]
