I found that the 230X did not support the mode that I wanted. I did not try to resolve the EEPROM issue.
On Thu, Oct 24, 2013 at 8:43 AM, Thomas Jarosch < [email protected]> wrote: > Hi Dave, > > On Monday, 22. July 2013 09:15:05 Dave Bender wrote: > > So I'm trying to set up synchronous bitbang on my FT230X board and am > > stuck configuring the CBUS pins. I am using ftdi_eeprom built from the > > latest git sources. I use a config file with the following lines: > > > > cbus0="BITBANG_WR" > > cbus1="IO_MODE" > > cbus2="IO_MODE" > > cbus3="IO_MODE" > > > > However, when I read back the EEPROM I get: > > > > CBUS0 Function: CLK12 > > CBUS1 Function: CLK24 > > CBUS2 Function: CLK24 > > CBUS3 Function: CLK24 > > > > It seems that config file parsing refers to the enum ftdi_cbus_func while > > reading back seems to refer to ftdi_cbush_func...can anyone advise if > this > > is a bug in ftdi_eeprom or libftdi? > > I'm just going through "unresolved issues" on the libftdi mailinglist... > > did you resolve this eeprom problem? > > Thomas > > -- libftdi - see http://www.intra2net.com/en/developer/libftdi for details. To unsubscribe send a mail to [email protected]
