This enhances the existing VMX input support allowing it to be
used over SSH to the ESXi server.
The original command (for local .vmx files) was:
$ virt-v2v -i vmx guest.vmx -o local -os /var/tmp
Adding ‘-it ssh’ and using an SSH remote path gives the new syntax:
$ virt-v2v \
-i vmx -it ssh \
"r...@esxi.example.com:/vmfs/volumes/datastore1/guest/guest.vmx" \
-o local -os /var/tmp
I anticipate that this input method will be widely used enough that it
deserves its own example at the top of the man page.
---
v2v/cmdline.ml | 26 +++++--
v2v/input_libvirt_other.ml | 9 ---
v2v/input_libvirt_other.mli | 1 -
v2v/input_vmx.ml | 171 +++++++++++++++++++++++++++++++++++++-------
v2v/input_vmx.mli | 5 +-
v2v/utils.ml | 9 +++
v2v/utils.mli | 2 +
v2v/virt-v2v.pod | 91 ++++++++++++++++++-----
8 files changed, 254 insertions(+), 60 deletions(-)
diff --git a/v2v/cmdline.ml b/v2v/cmdline.ml
index 719e6f057..0c6af3ed8 100644
--- a/v2v/cmdline.ml
+++ b/v2v/cmdline.ml
@@ -292,6 +292,7 @@ read the man page virt-v2v(1).
let input_transport =
match !input_transport with
| None -> None
+ | Some "ssh" -> Some `SSH
| Some "vddk" -> Some `VDDK
| Some transport ->
error (f_"unknown input transport ‘-it %s’") transport in
@@ -357,7 +358,8 @@ read the man page virt-v2v(1).
* should not be used.
*)
(match input_transport with
- | None ->
+ | None
+ | Some `SSH ->
if !vddk_config <> None ||
!vddk_cookie <> None ||
!vddk_libdir <> None ||
@@ -395,6 +397,12 @@ read the man page virt-v2v(1).
| [guest] -> guest
| _ ->
error (f_"expecting a libvirt guest name on the command line") in
+ let input_transport =
+ match input_transport with
+ | None -> None
+ | Some `VDDK -> Some `VDDK
+ | Some `SSH ->
+ error (f_"only ‘-it vddk’ can be used here") in
Input_libvirt.input_libvirt vddk_options password
input_conn input_transport guest
@@ -417,13 +425,19 @@ read the man page virt-v2v(1).
Input_ova.input_ova filename
| `VMX ->
- (* -i vmx: Expecting an vmx filename. *)
- let filename =
+ (* -i vmx: Expecting a vmx filename or SSH remote path. *)
+ let arg =
match args with
- | [filename] -> filename
+ | [arg] -> arg
| _ ->
- error (f_"expecting a VMX file name on the command line") in
- Input_vmx.input_vmx filename in
+ error (f_"expecting a single VMX file name or SSH remote path on the
command line") in
+ let input_transport =
+ match input_transport with
+ | None -> None
+ | Some `SSH -> Some `SSH
+ | Some `VDDK ->
+ error (f_"only ‘-it ssh’ can be used here") in
+ Input_vmx.input_vmx input_transport arg in
(* Common error message. *)
let error_option_cannot_be_used_in_output_mode mode opt =
diff --git a/v2v/input_libvirt_other.ml b/v2v/input_libvirt_other.ml
index e08d79cc9..42d8c7df6 100644
--- a/v2v/input_libvirt_other.ml
+++ b/v2v/input_libvirt_other.ml
@@ -39,15 +39,6 @@ let error_if_libvirt_does_not_support_json_backingfile () =
Libvirt_utils.libvirt_get_version () < (2, 1, 0) then
error (f_"because of libvirt bug https://bugzilla.redhat.com/1134878 you
must EITHER upgrade to libvirt >= 2.1.0 OR set this environment
variable:\n\nexport LIBGUESTFS_BACKEND=direct\n\nand then rerun the virt-v2v
command.")
-(* xen+ssh URLs use the SSH driver in CURL. Currently this requires
- * ssh-agent authentication. Give a clear error if this hasn't been
- * set up (RHBZ#1139973).
- *)
-let error_if_no_ssh_agent () =
- try ignore (Sys.getenv "SSH_AUTH_SOCK")
- with Not_found ->
- error (f_"ssh-agent authentication has not been set up ($SSH_AUTH_SOCK is
not set). Please read \"INPUT FROM RHEL 5 XEN\" in the virt-v2v(1) man page.")
-
(* Superclass. *)
class virtual input_libvirt (password : string option) libvirt_uri guest =
object
diff --git a/v2v/input_libvirt_other.mli b/v2v/input_libvirt_other.mli
index 494ca908a..8b1e8aa1d 100644
--- a/v2v/input_libvirt_other.mli
+++ b/v2v/input_libvirt_other.mli
@@ -19,7 +19,6 @@
(** [-i libvirt] source. *)
val error_if_libvirt_does_not_support_json_backingfile : unit -> unit
-val error_if_no_ssh_agent : unit -> unit
class virtual input_libvirt : string option -> string option -> string ->
object
method precheck : unit -> unit
diff --git a/v2v/input_vmx.ml b/v2v/input_vmx.ml
index c50217b9e..3032eba96 100644
--- a/v2v/input_vmx.ml
+++ b/v2v/input_vmx.ml
@@ -21,14 +21,82 @@ open Scanf
open Std_utils
open Tools_utils
+open Unix_utils
open Common_gettext.Gettext
open Types
open Utils
open Name_from_disk
-let rec find_disks vmx vmx_filename =
- find_scsi_disks vmx vmx_filename @ find_ide_disks vmx vmx_filename
+type vmx_source =
+ | File of string (* local file or NFS *)
+ | SSH of string option * string * string (* SSH username, server, path *)
+
+(* The single filename on the command line is intepreted either as
+ * a local file or a remote SSH path (only if ‘-it ssh’).
+ *)
+let vmx_source_of_arg input_transport arg =
+ match input_transport, arg with
+ | None, arg -> File arg
+ | Some `SSH, arg ->
+ let arg1, path = String.split ":" arg in
+ if path = "" then
+ error (f_"expecting [user@]server:path with ‘-it ssh’");
+ let user, server = match String.split "@" arg1 with
+ | server, "" -> None, server
+ | user, server -> Some user, server in
+ SSH (user, server, path)
+
+(* 'scp' a remote file into a temporary local file, returning the path
+ * of the temporary local file.
+ *)
+let memo_tmpdir = ref None
+let scp_from_remote_to_temporary user server path filename =
+ let tmpdir =
+ match !memo_tmpdir with
+ | None ->
+ let base_dir = (open_guestfs ())#get_cachedir () in
+ let t = Mkdtemp.temp_dir ~base_dir "vmx." in
+ rmdir_on_exit t;
+ memo_tmpdir := Some t;
+ t
+ | Some tmpdir -> tmpdir in
+
+ let localfile = tmpdir // filename in
+
+ (* XXX Assumes default port number. *)
+ let cmd =
+ sprintf "scp%s %s%s:%s %s"
+ (if verbose () then "" else " -q")
+ (match user with None -> "" | Some user -> quote user ^ "@")
+ (quote server)
+ (* The double quoting of the path is counter-intuitive
+ * but correct, see:
+ *
https://stackoverflow.com/questions/19858176/how-to-escape-spaces-in-path-during-scp-copy-in-linux
+ *)
+ (quote (quote path))
+ (quote localfile) in
+ if verbose () then
+ eprintf "%s\n%!" cmd;
+ if Sys.command cmd <> 0 then
+ error (f_"could not copy the VMX file from the remote server, see earlier
error messages");
+ localfile
+
+(* Test if [path] exists on the remote server. *)
+let remote_file_exists user server path =
+ (* XXX Assumes default port number. *)
+ let cmd =
+ sprintf "ssh %s%s test -f %s"
+ (match user with None -> "" | Some user -> quote user ^ "@")
+ (quote server)
+ (* Double quoting is necessary here, see above. *)
+ (quote (quote path)) in
+ if verbose () then
+ eprintf "%s\n%!" cmd;
+ Sys.command cmd = 0
+
+let rec find_disks vmx vmx_source =
+ find_scsi_disks vmx vmx_source @ find_ide_disks vmx vmx_source
(* Find all SCSI hard disks.
*
@@ -38,7 +106,7 @@ let rec find_disks vmx vmx_filename =
* | omitted
* scsi0:0.fileName = "guest.vmdk"
*)
-and find_scsi_disks vmx vmx_filename =
+and find_scsi_disks vmx vmx_source =
let get_scsi_controller_target ns =
sscanf ns "scsi%d:%d" (fun c t -> c, t)
in
@@ -50,7 +118,7 @@ and find_scsi_disks vmx vmx_filename =
Some "scsi-harddisk"; None ] in
let scsi_controller = Source_SCSI in
- find_hdds vmx vmx_filename
+ find_hdds vmx vmx_source
get_scsi_controller_target is_scsi_controller_target
scsi_device_types scsi_controller
@@ -60,7 +128,7 @@ and find_scsi_disks vmx vmx_filename =
* ide0:0.deviceType = "ata-hardDisk"
* ide0:0.fileName = "guest.vmdk"
*)
-and find_ide_disks vmx vmx_filename =
+and find_ide_disks vmx vmx_source =
let get_ide_controller_target ns =
sscanf ns "ide%d:%d" (fun c t -> c, t)
in
@@ -71,11 +139,11 @@ and find_ide_disks vmx vmx_filename =
let ide_device_types = [ Some "ata-harddisk" ] in
let ide_controller = Source_IDE in
- find_hdds vmx vmx_filename
+ find_hdds vmx vmx_source
get_ide_controller_target is_ide_controller_target
ide_device_types ide_controller
-and find_hdds vmx vmx_filename
+and find_hdds vmx vmx_source
get_controller_target is_controller_target
device_types controller =
(* Find namespaces matching '(ide|scsi)X:Y' with suitable deviceType. *)
@@ -101,9 +169,9 @@ and find_hdds vmx vmx_filename
match path, v with
| [ns; "filename"], Some filename ->
let c, t = get_controller_target ns in
+ let uri, format = qemu_uri_of_filename vmx_source filename in
let s = { s_disk_id = (-1);
- s_qemu_uri = qemu_uri_of_filename vmx_filename filename;
- s_format = Some "vmdk";
+ s_qemu_uri = uri; s_format = Some format;
s_controller = Some controller } in
Some (c, t, s)
| _ -> None
@@ -125,17 +193,48 @@ and find_hdds vmx vmx_filename
(* The filename can be an absolute path, but is more often a
* path relative to the location of the vmx file.
*
- * Note that we always end up with an absolute path, which is
- * also useful because it means we won't have any paths that
- * could be misinterpreted by qemu.
+ * This constructs a QEMU URI of the filename relative to the
+ * vmx file (which might be remote over SSH).
*)
-and qemu_uri_of_filename vmx_filename filename =
- if not (Filename.is_relative filename) then
- filename
- else (
- let dir = Filename.dirname (absolute_path vmx_filename) in
- dir // filename
- )
+and qemu_uri_of_filename vmx_source filename =
+ match vmx_source with
+ | File vmx_filename ->
+ (* Always ensure this returns an absolute path to avoid
+ * any confusion with filenames containing colons.
+ *)
+ absolute_path_from_other_file vmx_filename filename, "vmdk"
+
+ | SSH (user, server, vmx_path) ->
+ let abs_path = absolute_path_from_other_file vmx_path filename in
+ let format = "vmdk" in
+
+ (* XXX This is a hack to work around qemu / VMDK limitation
+ * "Cannot use relative extent paths with VMDK descriptor file"
+ * We can remove this if the above is fixed.
+ *)
+ let abs_path, format =
+ let flat_vmdk =
+ PCRE.replace (PCRE.compile "\\.vmdk$") "-flat.vmdk" abs_path in
+ if remote_file_exists user server flat_vmdk then (flat_vmdk, "raw")
+ else (abs_path, format) in
+
+ let json_params = [
+ "file.driver", JSON.String "ssh";
+ "file.path", JSON.String abs_path;
+ "file.host", JSON.String server;
+ "file.host_key_check", JSON.String "no";
+ ] in
+ let json_params =
+ match user with
+ | None -> json_params
+ | Some user ->
+ ("file.user", JSON.String user) :: json_params in
+
+ "json:" ^ JSON.string_of_doc json_params, format
+
+and absolute_path_from_other_file other_filename filename =
+ if not (Filename.is_relative filename) then filename
+ else (Filename.dirname (absolute_path other_filename)) // filename
(* Find all removable disks.
*
@@ -268,21 +367,41 @@ and find_nics vmx =
let nics = List.map (fun (_, source) -> source) nics in
nics
-class input_vmx vmx_filename = object
+class input_vmx input_transport arg = object
inherit input
- method as_options = "-i vmx " ^ vmx_filename
+ method as_options = "-i vmx " ^ arg
+
+ method precheck () =
+ match input_transport with
+ | None -> ()
+ | Some `SSH ->
+ if backend_is_libvirt () then
+ error (f_"because libvirtd doesn't pass the SSH_AUTH_SOCK environment
variable to qemu you must set this environment variable:\n\nexport
LIBGUESTFS_BACKEND=direct\n\nand then rerun the virt-v2v command.");
+ error_if_no_ssh_agent ()
method source () =
- (* Parse the VMX file. *)
- let vmx = Parse_vmx.parse_file vmx_filename in
+ let vmx_source = vmx_source_of_arg input_transport arg in
+
+ (* If the transport is SSH, fetch the file from remote, else
+ * parse it from local.
+ *)
+ let vmx =
+ match vmx_source with
+ | File filename -> Parse_vmx.parse_file filename
+ | SSH (user, server, path) ->
+ let filename =
+ scp_from_remote_to_temporary user server path "source.vmx" in
+ Parse_vmx.parse_file filename in
let name =
match Parse_vmx.get_string vmx ["displayName"] with
+ | Some s -> s
| None ->
warning (f_"no displayName key found in VMX file");
- name_from_disk vmx_filename
- | Some s -> s in
+ match vmx_source with
+ | File filename -> name_from_disk filename
+ | SSH (_, _, path) -> name_from_disk path in
let memory_mb =
match Parse_vmx.get_int64 vmx ["memSize"] with
@@ -333,7 +452,7 @@ class input_vmx vmx_filename = object
None
| None -> None in
- let disks = find_disks vmx vmx_filename in
+ let disks = find_disks vmx vmx_source in
let removables = find_removables vmx in
let nics = find_nics vmx in
diff --git a/v2v/input_vmx.mli b/v2v/input_vmx.mli
index f236f8716..34ec2a5c6 100644
--- a/v2v/input_vmx.mli
+++ b/v2v/input_vmx.mli
@@ -18,5 +18,6 @@
(** [-i vmx] source. *)
-val input_vmx : string -> Types.input
-(** [input_vmx filename] sets up an input from vmware vmx file. *)
+val input_vmx : [`SSH] option -> string -> Types.input
+(** [input_vmx input_transport arg] sets up an input
+ from vmware vmx file. *)
diff --git a/v2v/utils.ml b/v2v/utils.ml
index 91c0ed1c8..d5d177e42 100644
--- a/v2v/utils.ml
+++ b/v2v/utils.ml
@@ -138,6 +138,15 @@ let backend_is_libvirt () =
let backend = fst (String.split ":" backend) in
backend = "libvirt"
+(* When using the SSH driver in qemu (currently) this requires
+ * ssh-agent authentication. Give a clear error if this hasn't been
+ * set up (RHBZ#1139973). This might improve if we switch to libssh1.
+ *)
+let error_if_no_ssh_agent () =
+ try ignore (Sys.getenv "SSH_AUTH_SOCK")
+ with Not_found ->
+ error (f_"ssh-agent authentication has not been set up ($SSH_AUTH_SOCK is
not set). This is required by qemu to do passwordless ssh access. See the
virt-v2v(1) man page for more information.")
+
let ws = PCRE.compile "\\s+"
let find_file_in_tar tar filename =
diff --git a/v2v/utils.mli b/v2v/utils.mli
index 8d902a53a..422fde298 100644
--- a/v2v/utils.mli
+++ b/v2v/utils.mli
@@ -53,6 +53,8 @@ val qemu_img_supports_offset_and_size : unit -> bool
val backend_is_libvirt : unit -> bool
(** Return true iff the current backend is libvirt. *)
+val error_if_no_ssh_agent : unit -> unit
+
val find_file_in_tar : string -> string -> int64 * int64
(** [find_file_in_tar tar filename] looks up file in [tar] archive and returns
a tuple containing at which byte it starts and how long the file is.
diff --git a/v2v/virt-v2v.pod b/v2v/virt-v2v.pod
index 503830c9d..79269a9da 100644
--- a/v2v/virt-v2v.pod
+++ b/v2v/virt-v2v.pod
@@ -118,6 +118,23 @@ Note that after conversion, the guest will appear in the
RHV-M Export
Storage Domain, from where you will need to import it using the RHV-M
user interface. (See L</OUTPUT TO RHV>).
+=head2 Convert from ESXi hypervisor over SSH to local libvirt
+
+You have an ESXi hypervisor called C<esxi.example.com> with SSH access
+enabled. You want to convert from VMFS storage on that server to
+a local file.
+
+ virt-v2v \
+ -i vmx -it ssh \
+ "r...@esxi.example.com:/vmfs/volumes/datastore1/guest/guest.vmx" \
+ -o local -os /var/tmp
+
+The guest must not be running. Virt-v2v would I<not> need to be run
+as root in this case.
+
+For more information about converting from VMX files see
+L</INPUT FROM VMWARE VMX> below.
+
=head2 Convert disk image to OpenStack glance
Given a disk image from another hypervisor that you want to convert to
@@ -343,9 +360,10 @@ L</INPUT FROM VMWARE OVA> below
Set the input method to I<vmx>.
-In this mode you can read a VMware vmx file directly. This is useful
-when VMware VMs are stored on an NFS server which you can mount
-directly. See L</INPUT FROM VMWARE VMX> below
+In this mode you can read a VMware vmx file directly or over SSH.
+This is useful when VMware VMs are stored on an NFS server which you
+can mount directly, or where you have access by SSH to an ESXi
+hypervisor. See L</INPUT FROM VMWARE VMX> below
=item B<-ic> libvirtURI
@@ -379,6 +397,11 @@ See L</IN PLACE CONVERSION> below.
Conflicts with all I<-o *> options.
+=item B<-it> B<ssh>
+
+When using I<-i vmx>, this enables the ssh transport.
+See L</INPUT FROM VMWARE VMX> below.
+
=item B<-it> B<vddk>
Use VMware VDDK as a transport to copy the input disks. See
@@ -1347,9 +1370,23 @@ directory containing the files:
=head1 INPUT FROM VMWARE VMX
-Virt-v2v is able to import guests from VMware’s vmx files. This is
-useful where VMware virtual machines are stored on a separate NFS
-server and you are able to mount the NFS storage directly.
+Virt-v2v is able to import guests from VMware’s vmx files.
+
+This is useful in two cases:
+
+=over 4
+
+=item 1.
+
+VMware virtual machines are stored on a separate NFS server and you
+are able to mount the NFS storage directly.
+
+=item 2.
+
+You have enabled SSH access to the VMware ESXi hypervisor and there is
+a C</vmfs/volumes> folder containing the virtual machines.
+
+=back
If you find a folder of files called F<I<guest>.vmx>,
F<I<guest>.vmxf>, F<I<guest>.nvram> and one or more F<.vmdk> disk
@@ -1375,28 +1412,50 @@ With other methods, virt-v2v tries to prevent
concurrent access, but
because the I<-i vmx> method works directly against the storage,
checking for concurrent access is not possible.
-=head2 VMX: MOUNT THE NFS STORAGE ON THE CONVERSION SERVER
+=head2 VMX: ACCESS TO THE STORAGE CONTAINING THE VMX AND VMDK FILES
-Virt-v2v must be able to access the F<.vmx> file and any local
-F<.vmdk> disks. Normally this means you must mount the NFS storage
-containing these files.
+If the vmx and vmdk files aren't available locally then you must
+I<either> mount the NFS storage on the conversion server I<or> enable
+passwordless SSH on the ESXi hypervisor.
+
+=head3 VMX: Passwordless SSH using ssh-agent
+
+You must also use ssh-agent, and add your ssh public key to
+F</etc/ssh/keys-root/authorized_keys> (on the ESXi hypervisor).
+
+After doing this, you should check that passwordless access works from
+the virt-v2v server to the ESXi hypervisor. For example:
+
+ $ ssh r...@esxi.example.com
+ [ logs straight into the shell, no password is requested ]
+
+Note that password-interactive and Kerberos access are B<not>
+supported. You B<have> to set up ssh access using ssh-agent and
+authorized_keys.
=head2 VMX: IMPORTING A GUEST
-To import a vmx file, do:
+To import a vmx file from a local file or NFS, do:
$ virt-v2v -i vmx guest.vmx -o local -os /var/tmp
+To import a vmx file over SSH, add I<-it ssh> to select the SSH
+transport and supply a remote C<server:/path> with optional username:
+
+ $ virt-v2v \
+ -i vmx -it ssh \
+ "r...@esxi.example.com:/vmfs/volumes/datastore1/guest/guest.vmx" \
+ -o local -os /var/tmp
+
Virt-v2v processes the vmx file and uses it to find the location of
any vmdk disks.
=head1 INPUT FROM VMWARE ESXi HYPERVISOR
-Virt-v2v cannot access an ESXi hypervisor directly. You should use
-the OVA or VMX methods above (see L</INPUT FROM VMWARE OVA> and/or
-L</INPUT FROM VMWARE VMX>) if possible, as it is much faster and
-requires much less disk space than the method described in this
-section.
+You should use the OVA or VMX methods above (see L</INPUT FROM VMWARE
+OVA> and/or L</INPUT FROM VMWARE VMX>) if possible, as it is much
+faster and requires much less disk space than the method described in
+this section.
You can use the L<virt-v2v-copy-to-local(1)> tool to copy the guest
off the hypervisor into a local file, and then convert it.
--
2.13.2
_______________________________________________
Libguestfs mailing list
Libguestfs@redhat.com
https://www.redhat.com/mailman/listinfo/libguestfs
