Hi, > Try reading 64 bytes instead of 11 bytes.
libhid won't let me: TRACE: hid_interrupt_read(): retrieving interrupt report from device 001/006[0] ... WARNING: hid_interrupt_read(): failed to get all of interrupt report from device 001/006[0]; requested: 64 bytes, sent: 12 bytes. It then returns FAIL. That is understandable from the libhid code, but I did get the 12 Bytes I was wanting (11 for the report, there's the 0x42 reportID in front). I have hacked around my code to ignore that result and go on but it does not work either. As before it fails on the second command. The first one is always fine: TRACE: hid_set_output_report(): looking up report ID... TRACE: hid_prepare_parse_path(): preparing search path of depth 3 for parse tree of USB device 001/006[0]... TRACE: hid_prepare_parse_path(): search path prepared for parse tree of USB device 001/006[0]. NOTICE: hid_find_object(): found requested item. TRACE: hid_set_output_report(): sending report ID 0x02 (length: 12) to USB device 001/006[0]... NOTICE: hid_set_output_report(): successfully sent report to USB device 001/006[0]. TRACE: hid_interrupt_read(): retrieving interrupt report from device 001/006[0] ... WARNING: hid_interrupt_read(): timeout on interrupt read from device 001/006[0] I am done for today and will experiment a bit more tomorrow. I might try to copy the code from interrupt_read in libhid to my program and try my hand at that. Thank you very much for you help so far! Ciao, MM _______________________________________________ libhid-discuss mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/libhid-discuss
