Howard Butler wrote: > On Mar 10, 2010, at 10:46 AM, Bellinski, Dan wrote: > >> Hey Mateusz, >> >> I am using your CMake build with the latest libLAS code and running >> into a build error. I am linking libLAS with gdal 1.7.1 trunk and >> GeoTIFF 1.2.5 (linked with libTIFF 3.9.2). I have successfully >> built all the components (other than libLAS) and used the CMake >> files to create Visual Studio 2009 project files. All went well in >> the CMake generation with no error or warning. When I go to build >> from the generated VS project files, Las2ogr and las_c.dll are >> failing to build. The problematic output is listed below. >> >> I am unsure where to go with troubleshooting.. do you have any idea >> what the problem may be? I made sure my libraries were correct in >> CMake but maybe I am missing something? I have the following >> library/include variables set up and building in release mode: >> >> [...] > > Dan, > > I believe this is a liblas cmake configuration issue where libtiff > must be included as a library to link if GDAL is also linked. GDAL > unfortunately has the ability to internally or externally link > libtiff, but there is no way to tell which it did as an outside user. > In your case (MapServer buildkit, right?), I think the linkage is > external, so we need to have -ltiff included in the libs as well. > Hopefully, Mateusz can give us the bits of cmake script that would do > that.
Dan, Hobu, I'll try to find out how to fix it. I remember I tried to test all possible combinations of dependencies, but some cases might have got missing. Best regards, Mateusz Loskot, http://mateusz.loskot.net Charter Member of OSGeo, http://osgeo.org _______________________________________________ Liblas-devel mailing list [email protected] http://lists.osgeo.org/mailman/listinfo/liblas-devel
