On Thu, Apr 16, 2009 at 8:07 AM, Svilen Sabchevski <[email protected]> wrote: > > > Dear All, > > Please see attached a simple test code called gyreoss.c. > It reads the mesh file test.msh produced by gmsh using > the geometry description in the file test.geo. Then the > code prints information about the mesh. Also attached > are files with the output of the code in optimized as well > as in the debugging modes > > Unfortunately, neither the number of nodes nor the > number of the elements are correct. > > Additionally there is an error when attempting to get data from > the active elements: > Assertion `_elem_data_closed' failed. > > > I wonder if this is a bug or improper usage of the library > from my side. > > Any hint would be greatly appreciated.
Hi, For me at least, your attachment did not make it through to the list. I also did not find your message trapped in any of the sourceforge list filters. If the attachment was larger than 40K, it may have been deleted automatically... You can send it to me directly and I'll have a look when time permits. -- John ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ Libmesh-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/libmesh-users
