John, I was able to successfully compile the complex libmesh version after carefully dealing with LIBMESH_DIR. Thanks for the help.
On Mon, Nov 14, 2011 at 11:59 PM, Kyunghoon Lee <[email protected]>wrote: > I suspected that too, and checked DYLD_LIBRARY_PATH, but it seemed I do > not have set LIBMESH_DIR to either real or complex libmesh versions. > However, on the second thought, I might obliviously mess up with > LIBMESH_DIR since I built the real version libmesh first, then moved on > building the complex version libmesh. I'll try again later. > > > On Mon, Nov 14, 2011 at 11:28 PM, John Peterson <[email protected]>wrote: > >> On Mon, Nov 14, 2011 at 8:23 AM, Kyunghoon Lee >> <[email protected]> wrote: >> > Hi all, >> > >> > I built two libmesh libraries for real and complex numbers under >> 'libmesh' >> > (real) and 'libmesh_complex' (complex) directories; both versions have >> the >> > same configurations except "--enable-complex" for the complex one. >> (Note >> > that I also built separate petsc/slepc libraries for real and complex >> > libmesh libraries.) Now the libmesh library for real numbers works >> fine, >> > but I have a problem with the one for complex numbers --- I checked with >> > ex7, which tests complex number support, and found that it is linked >> with >> > the real libmesh library, not the complex number version. I'm a bit >> > perplexed since ex7 locates under the 'libmesh_complex' directory, but >> the >> > example calls the real libmesh library under the 'libmesh' directory. >> I'd >> > appreciate it if someone could help me with this problem. >> >> Only thing that comes to mind is you have LIBMESH_DIR set in your >> environment to the location of the real-valued library? >> >> -- >> John >> > > ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Libmesh-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/libmesh-users
