Hi John and Roy, Your suspicions were correct - I found an old build, cleaned it out, recompiled, no errors and make check has just finished its tests. As for the PETSc version, it was also part of an old build.
Thanks very much! On 05/12/13 17:32, John Peterson wrote: > On Thu, Dec 5, 2013 at 10:14 AM, Peter Wijeratne <[email protected]> > wrote: >> Hi John, >> >> Thanks for the help. I've attached the config and make logs for your >> appraisal. > Thanks. I certainly don't see anything suspicious here... We may get > slightly more useful information if you run "make V=1" and check the > output of that, but I sort of doubt it. > > Is it possible, like Roy suggested, that you had an old build > directory laying around and we're seeing a conflict between netcdf > 4.2.1.1 and 4.3.0? > > Speaking of PETSc, is there any particular reason you are using > petsc-2.3.1-p19? It is incredibly old (2006) in software time, and I > wouldn't be at all surprised if some backwards-incompatible stuff has > shown up in libmesh in the last few years. Unless there is a specific > reason you are stuck on such an old version, I'd recommend upgrading. > ------------------------------------------------------------------------------ Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk _______________________________________________ Libmesh-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/libmesh-users
