Just copying this discussion back to the mailing list since it dropped off...
-- John ---------- Forwarded message ---------- From: John Peterson <[email protected]> Date: Tue, Nov 3, 2015 at 8:21 AM Subject: Re: [Libmesh-users] reduced_basis_ex6 FAILED To: Jianfeng <[email protected]> On Tue, Nov 3, 2015 at 12:17 AM, Jianfeng <[email protected]> wrote: > Hi, John > > I recompiled libmesh with newly installed mpich-3.1.4 and PETSc 3.6.2 and > still got the same error in reduced_basis_ex6, although other test cases > were run successfully. > > Besides, I tried the configuration without --enable-blocked-storage and > everything worked well. By default, blocked-storage is not enabled even if > --enable-everything is used. > > BTW, test cases of both mpich and petsc could be run successfully. > Ah, yes, you are right and there is an old thread about this that I had forgotten: https://sourceforge.net/p/libmesh/mailman/libmesh-devel/thread/[email protected]/ I've started a new issue for this here: https://github.com/libMesh/libmesh/issues/703 One simple fix may be to revert the changes to the run.sh files in https://github.com/libMesh/libmesh/commit/b4d47091f992bf2d01b6ac37d5dcb6f9797c4ab0 Thanks for your effort in helping track down the problem and sorry for the trouble, John ------------------------------------------------------------------------------ _______________________________________________ Libmesh-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/libmesh-users
