On Fri, Jun 8, 2018 at 12:03 PM David Knezevic <david.kneze...@akselos.com> wrote:
> On Fri, Jun 8, 2018 at 11:57 AM, Amneet Bhalla <mail2amn...@gmail.com> > wrote: > > > Hi Folks, > > > > Is it possible to use DistMesh with libMesh? If so, is there an example > > code? > > I want to use DistMesh as it generates very symmetric (well shaped) > > triangulation, which is important for an application that I am > considering. > > > > http://persson.berkeley.edu/distmesh/ > > > > Best, > > -- > > --Amneet > > > > > There is no direct interface to Distmesh. I would suggest that you generate > your mesh in Distmesh, then convert it to a format that libMesh does > support, like ExodusII, VTK, Abaqus format, or xda. Agreed, this is this is probably the most straight forward thing to do, but if you come up with a script (or decide to add a DistMesh reader, but probably overkill), I'd personally like to capture that in libMesh proper. > Note that xda is > libMesh's own mesh format, and it is documented in the repository here > <https://github.com/libMesh/libmesh/tree/master/doc/latex/xda_format>. > > Best, > David > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Libmesh-users mailing list > Libmesh-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/libmesh-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Libmesh-users mailing list Libmesh-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/libmesh-users
