On 12/06/2011 22:15, Thomas NOEL wrote:
>
>
> 2011/6/12 elwan ndiaye <[email protected] <mailto:[email protected]>>
>
> :'(
> merci thomas !
>
>
> De rien...
>
> J'ai peut-être été pessimiste aussi.
> Quel est ton problème, concrètement ?
en faite lorsque l’ordinateur par en veille impossible de le réveillé
:) et si je redémarre parfois je perds mes partitions systèmes alors
je suis allé au niveau du gestionnaire de disque et il me montre que
plusieurs secteurs sont défectueux au niveau du disque
>
> A noter que si tu veux voir ce que SMART a fait sur ton disque, tu
> peux lancer la commande "smartctl --all /dev/sda" où /dev/sda sera le
> nom de ton disque (genre /dev/sda, /dev/sdb, etc.). smartctl fait
> partie du paquet "smartmontools" qu'on installe parfois sur des
> serveurs (il envoie un mail quand un paramètre montre une défaillance
> disque).
voici le resultat de le commande smartctl --all /dev/sda en pièce jointe
@+
>
> a+
> --
> Thomas
>
>
>
> --
> Ce message a été envoyé à la liste [email protected]
> Gestion de votre abonnement : http://dakarlug.org/liste
> Archives : http://news.gmane.org/gmane.org.user-groups.linux.dakarlug
> Le site du DakarLUG : http://dakarlug.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6 series
Device Model: ST9640320AS
Serial Number: 5WX0J1R0
Firmware Version: 0001SDM1
User Capacity: 640 135 028 736 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Mon Jun 13 13:19:52 2011 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 168) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 112 077 006 Pre-fail Always
- 44327920
3 Spin_Up_Time 0x0003 099 098 085 Pre-fail Always
- 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always
- 2175
5 Reallocated_Sector_Ct 0x0033 082 082 036 Pre-fail Always
- 384
7 Seek_Error_Rate 0x000f 056 055 030 Pre-fail Always
- 343636712886
9 Power_On_Hours 0x0032 099 099 000 Old_age Always
- 1658
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always
- 1951
184 End-to-End_Error 0x0032 100 100 099 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always
- 29400
188 Command_Timeout 0x0032 100 001 000 Old_age Always
- 131361
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 054 036 045 Old_age Always
In_the_past 46 (1 204 50 44)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always
- 280
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 210
193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always
- 13734
194 Temperature_Celsius 0x0022 046 064 000 Old_age Always
- 46 (0 22 0 0)
195 Hardware_ECC_Recovered 0x001a 046 038 000 Old_age Always
- 44327920
197 Current_Pending_Sector 0x0012 100 099 000 Old_age Always
- 3
198 Offline_Uncorrectable 0x0010 100 099 000 Old_age Offline
- 3
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline
- 265871360525868
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline
- 1591557216
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline
- 403620889
254 Free_Fall_Sensor 0x0000 100 100 000 Old_age Offline
- 0
SMART Error Log Version: 1
ATA Error Count: 28575 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28575 occurred at disk power-on lifetime: 1640 hours (68 days + 8 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 51 20 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 50 20 00 40 00 00:07:19.736 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:07:19.708 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:07:19.638 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:07:19.624 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:07:19.597 READ NATIVE MAX ADDRESS EXT
Error 28574 occurred at disk power-on lifetime: 1640 hours (68 days + 8 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 51 20 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 50 20 00 40 00 00:07:13.225 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:07:13.198 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:07:13.195 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:07:13.182 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:07:13.155 READ NATIVE MAX ADDRESS EXT
Error 28573 occurred at disk power-on lifetime: 1640 hours (68 days + 8 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 51 20 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 50 20 00 40 00 00:07:06.874 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:07:06.847 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:07:06.844 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:07:06.760 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:07:06.733 READ NATIVE MAX ADDRESS EXT
Error 28572 occurred at disk power-on lifetime: 1640 hours (68 days + 8 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 51 20 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 50 20 00 40 00 00:07:00.442 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:07:00.414 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:07:00.412 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:07:00.328 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:07:00.300 READ NATIVE MAX ADDRESS EXT
Error 28571 occurred at disk power-on lifetime: 1640 hours (68 days + 8 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 51 20 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 50 20 00 40 00 00:06:53.989 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:06:53.962 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:06:53.959 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:06:53.875 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:06:53.848 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed: read failure 90% 1541
6417672
# 2 Short offline Completed: read failure 90% 1538
6417672
# 3 Short offline Completed: read failure 90% 1538
6417672
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
Ce message a été envoyé à la liste [email protected]
Gestion de votre abonnement : http://dakarlug.org/liste
Archives : http://news.gmane.org/gmane.org.user-groups.linux.dakarlug
Le site du DakarLUG : http://dakarlug.org
