Hi all, I get strange behaviour with Libreboot 20160818 on Thinkpad x200. When Grub shows up, I select "Boot from usb". It then loads the Trisquel menu where I select whatever I want (e.g. install, boot from live cd) and I get the error message:
Error: USB mass storage stalled Error: you need to load kernel first Press any key to continue I tried the same with another usb-stick with Tails and it booted without any complaint (tried several times). Other strange behaviour: sometimes I get a "kernel panic" message with the uppercase led blinking and the system stops (this can occur with both sticks, but with Tails the message just pops up a fraction of a second and then it continues booting). Does anybody know what the problem could be? BTW: flashing the x200 was very slow (due to bad connection with the clip I had to reduce speed to 128 and it took 1.5 hours (!) - I also had to specify manually the "MX25L6405D" with the -c option), but the content of the flash chip seems to be correct (it said VERIFIED in the end). Thx and greetings, Marcel Enviado desde mi iPhone
