Hi, Le dimanche 06 décembre 2015 à 23:26 +0100, Albin a écrit : > Problem solved; libreboot installed! > > I first inserted the SD card into a different computer and tried to run > the script there but got the same error message. Then I copied over > flash.img into the veyron_speedy directory that was created after the > compilation process and ran the script from there as user. This worked > fine and then I had no trouble installing libreboot on the chromebook > using flashrom.
Good to hear. > It would be good to mention in the documentation that there can be a > problem with execution rights. I had the same problem when trying to run > the scrip both from the SD card and from the internal storage, i.e. > after copying over the files from the SD card. That's odd though, I have not experienced the same kind of issue. I have added a note about this in the docs. > Now I only need to figure out how to install a functional GNU system and > get rid of ChromeOS. Inserting a Debian installer (armhf) and pressing > Ctrl+U results in a loud *beep* even with all the security features > disabled. Do I need to prepare a custom installer image? Yes, you do. I haven't documented that yet, but the Debian guide is a good starting point. > >>>>>> Den 2015-12-04 kl. 23:49, skrev Albin: > >>>>>>> Hi. > >>>>>>> > >>>>>>> Tonight I tried to install libreboot onto an ASOS C201. I ran into a > >>>>>>> number of difficulties that I managed to overcome (see the points > >>>>>>> below, > >>>>>>> my contribution to the docs), but then I got stuck at the point where > >>>>>>> one is to run the cros-flash-replace script. The terminal keeps > >>>>>>> returning PERMISSION DENIED. The file permissions, however, are the > >>>>>>> same > >>>>>>> as just after compilation and I've also removed The Screw as > >>>>>>> instructed. > >>>>>>> > >>>>>>> Does anyone have a clue what might be the problem? > >>>>>>> > >>>>>>> Cheers, > >>>>>>> > >>>>>>> Albin > >>>>>>> > >>>>>>> > >>>>>>> Errors found in the documentation: > >>>>>>> > >>>>>>> 1. There are *eight* screws that need to be removed to open the > >>>>>>> device, > >>>>>>> not seven. There is (at least on my device) one also beneath the top > >>>>>>> left pad. > >>>>>>> > >>>>>>> 2. You get into the TTY promt by pressing *Ctrl+Alt+Next*. > >>>>>>> *Ctrl+Alt+Previous* is for exiting the promt. > >>>>>>> > >>>>>>> 3. The guide mentions first "cros-flash-replace" and then > >>>>>>> "cros-firmware-replace": > >>>>>>> > >>>>>>> "Then, the cros-flash-replace script has to be executed as such: > >>>>>>> # ./cros-firmware-replace flash.img coreboot ro-frid" > >>>>>>> > >>>>>>> By the way, shouldn't there be .img extensions after coreboot and > >>>>>>> ro-frid? > >>>>>>> > >>>>>> > >>>>> > >>>> > >>> > >> > > >
signature.asc
Description: This is a digitally signed message part
