On Fri, 2015-08-14 at 14:48 -0400, Benjamin Rochefort wrote: > Hello, > > I have a TP-WR841ND (v9) router on which I replaced the original > firmware by DD-WRT. In an ongoing effort to use free software > everywhere I can, I'd like to use libreCMC on that router. My question > is: can I migrate directly from DD-WRT to libreCMC by simply accessing > the DD-WRT firmware upgrade page and using the v1.3.1-Factory-v9 bin > file from https://librecmc.org/librecmc/wiki?name=TL-WR841ND? > Yes, libreCMC can be flashed to this router, but the process is a bit involved (more than just using a web-ui). I thew some rough documentation [1] together, but it needs a little bit more work.
If you choose to take the plunge, make sure that you use the factory image [2]. After flashing, you will need to do the following: 1. Log-in to the web-ui (192.168.1.1) 2. Set an admin / root password 3. Enable forwarding : * Network -> Firewall * Forwarding is set to : Accept * Input : drop * make sure that the wan interface has the same settings. 4. Setup wifi (under Network -> Wifi) The above is not extensive and may not work with some configurations. [1] DD-WRT to libreCMC - https://librecmc.org/librecmc/wiki?name=DD-WRT +to+libreCMC [2] librecmc-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin [2] http://downloads.librecmc.org/snapshots/v1.3.1/ar71xx/generic/librecmc-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin -- Robert Call (Bob) b...@librecmc.org http://librecmc.org _______________________________________________ Librecmc-dev mailing list Librecmc-dev@lists.librecmc.org https://librecmc.org/mailman/listinfo/librecmc-dev
