https://bugs.freedesktop.org/show_bug.cgi?id=37733
--- Comment #19 from Marty Fried <[email protected]> --- I uninstalled the old version, and installed 4.0.3.3. I selected "Insert Envelope", and used the default size, which was #10 envelope, 9.5" x 4.13", which is the right size for the test envelope I used. The margins for sender were 0.39" (both left and top) The result was truncated on the left by 2 characters, and the position was: Left, 0.6", Top: 0.875" At first I thought perhaps my printer would not print any closer, but I printed an envelope from MS Office 2010, and the return address was Left: 0.45", top: 0.31". I then inserted a new envelope, but changed the left margin to 0.6" (the actual result from the first test), and the address was not truncated, and printed at the 0.625" from the left, just slightly more than the first test. So this will mask the problem, but doesn't look very good. I did a test, setting all margins to zero, and printed a full page (8.5 x 11) of text. The actual margins ended up as Left/Right: 0.125", top/bottom: 0.5", so I guess this must be the actual printer limits. There was truncation, but when I set the margins to 0.25" top/bottom and 0.5" left/right, it printed perfectly. As far as PDF goes, I did "Print to PDF", as I wanted to test the print function, and assumed save to PDF would work fine, as it always seems to do. The print to PDF output was not truncated, but I don't really know how to test it to an envelope. It prints fine to a full page. FWIW, it acts as if the envelope printing module thinks that it can only print within 0.6" of the left edge of envelope, so it doesn't try to finish. I am feeding the envelope with the right short edge leading, if that matters. I just discovered (rediscovered) that there are a bunch of settings for envelopes, including "print from top" (it's set to bottom), and the orientation; also, I see the shift right and shift down. I think I messed with these before my initial report, but I don't remember the results. I can do more extensive tests with these settings, and if you have specific suggestions, I'll be sure to include them. By the way, the pictures for the orientation are not quite right, as the one I used (far right) shows the envelope in a way that would cause it to print upside down. -- You are receiving this mail because: You are the assignee for the bug.
_______________________________________________ Libreoffice-bugs mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
