https://bugs.documentfoundation.org/show_bug.cgi?id=166235
V Stuart Foote <[email protected]> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|UNCONFIRMED |NEEDINFO CC| |[email protected] Ever confirmed|0 |1 --- Comment #2 from V Stuart Foote <[email protected]> --- You might try translate.google.com, it looks to support bg-BG Bulgarian without needing the DeepL Otherwise, issue seems like it could be a dupe of bug 166122 and issues with the build system update from skia m116 to skia m130 Could you please post details about your system's CPU, GPU and the graphics drivers. See how to find the details https://bugs.documentfoundation.org/show_bug.cgi?id=166122#c22 Also, if the issue is the same LibreOffice startup testing of Vulkan rendering using skia calls--you can bypass that rendering testing and get a working install of 25.2.2 >From the Safe mode start panel as in attachment. But if you are unable to get into the GUI to get to SafeMode you can --simply add/adjust renderings stanzas directly in per user Profile registrymodifications.xcu: <item oor:path="/org.openoffice.Office.Common/VCL"><prop oor:name="ForceSkiaRaster" oor:op="fuse"><value>true</value></prop></item> <item oor:path="/org.openoffice.Office.Common/VCL"><prop oor:name="UseSkia" oor:op="fuse"><value>true</value></prop></item> They won't be there with a new default profile (and Skia Vulkan enabled by default), but you can add them both. And the ForceSkiaRaster will toggle between Skia Vulkan and Skia software based raster framing with edits outside of LibreOffice. If you set them both to 'False', skia rendering libs will not be used and system will instead use fallback GDI+ rendering that your graphics processor or the CPU can support. On major version upgrades, e.g. 24.8 to 25.2, the profile will be replaced. So you may need to make a copy of the old profile .xcu modified with the two stanzas--ForceSkiaRaster and UseSkia. Then after install of 25.2.2 replace the default registrymodifications.xcu with the copy from 24.8 Again, the main NEEDINFO is for you to post the details about your graphics processor (discrete card or one integrated with the CPU) and what driver is used. =-Google translate gloss-= Може да опиташ translate.google.com, изглежда поддържа bg-BG български, без да има нужда от DeepL В противен случай изглежда, че проблемът може да е дублиране на грешка 166122 и проблеми с актуализацията на системата за компилация от skia m116 до skia m130 Бихте ли могли да публикувате подробности за процесора, графичния процесор и графичните драйвери на вашата система. Вижте как да намерите подробностите https://bugs.documentfoundation.org/show_bug.cgi?id=166122#c22 Освен това, ако проблемът е същото стартиращо тестване на LibreOffice на рендиране на Vulkan с помощта на skia повиквания – можете да заобиколите това тестване на рендиране и да получите работеща инсталация на 25.2.2 От панела за стартиране на безопасен режим, както в прикачения файл. Но ако не можете да влезете в графичния потребителски интерфейс, за да стигнете до SafeMode, можете просто да добавите/настроите строфи за изобразяване директно в потребителски профил registrymodifications.xcu: <item oor:path="/org.openoffice.Office.Common/VCL"><prop oor:name="ForceSkiaRaster" oor:op="fuse"><value>true</value></prop></item> <item oor:path="/org.openoffice.Office.Common/VCL"><prop oor:name="UseSkia" oor:op="fuse"><value>true</value></prop></item> Те няма да бъдат там с нов профил по подразбиране (и Skia Vulkan активиран по подразбиране), но можете да ги добавите и двамата. И ForceSkiaRaster ще превключва между Skia Vulkan и Skia софтуерно базирано растерно рамкиране с редакции извън LibreOffice. Ако зададете и двете на „False“, библиотеките за рендиране на skia няма да се използват и вместо това системата ще използва резервно GDI+ рендиране, което вашият графичен процесор или CPU може да поддържа. При надстройки на големи версии, напр. 24.8 до 25.2 профилът ще бъде сменен. Така че може да се наложи да направите копие на стария профил .xcu, модифициран с двете строфи - ForceSkiaRaster и UseSkia. След това след инсталиране на 25.2.2 заменете по подразбиране registrymodifications.xcu с копието от 24.8 Отново основната NEEDINFO е да публикувате подробности за вашия графичен процесор (дискретна карта или интегрирана с процесора) и какъв драйвер се използва. -- You are receiving this mail because: You are the assignee for the bug.
