https://bugs.documentfoundation.org/show_bug.cgi?id=135431
--- Comment #4 from Regina Henschel <[email protected]> --- Created attachment 174356 --> https://bugs.documentfoundation.org/attachment.cgi?id=174356&action=edit Dimension line for testing Neither 'Position and Size' nor 'Dimensions' dialog allow to determine the exact position of the two defining points of a measure line. I work in Draw with unit 'mm'. Open attached document and select the dimension line. It should show 28mm. You decide, that you need 28.5mm: Open 'Position&Size' dialog and set width to 28.5mm. The dimension line should show 28.5mm now. The horizontal position should still be 30.0mm. OK. You decide, that you was wrong but need 28.4mm: Open 'Position&Size' dialog. Look at the width field. It does no longer show 28.5mm and the horizontal position has changed too. You are lost. It is not possible to set the dimension line to show 28.4mm and have left position of the measure point at 30.0mm. There exist workarounds, but a simple way to determine exact position and size of a dimension line corresponding to the two measure points is missing in the UI. -- You are receiving this mail because: You are the assignee for the bug.
