https://bugs.documentfoundation.org/show_bug.cgi?id=144899
--- Comment #3 from Rafael Lima <[email protected]> --- (In reply to Deep17 from comment #1) > This issue is reproducible only if the distance value is set to zero. For > every other value set in the distance it is working as expected. As pointed out by Deep17, this bug only happens if the distance is left at zero. When I change the distance value, the position of the shadow is applied and saved as expected. What I'm confused about this dialog is the default behavior when you apply the border at first. For instance, create a table and follow these steps: 1) Create the table 2) Right click and then go to Table Properties > Shadow 3) Click "Use shadow" 4) Do not change anything (use defaults) and click OK 5) Notice that a shadow is applied to the lower-right corner However, the distance is still set to Zero in the dialog. If you right-click this table again, go to Table Properties > Shadow, you'll notice that the distance is zero, even though it is definitely not zero since there is shadow in the table (the actual value is 0,2 cm, which can be seen using Tools - Development Tools). So the dialog is not showing the Distance value when the default table shadow is applied. -- You are receiving this mail because: You are the assignee for the bug.
