sw/inc/AnnotationWin.hxx | 1 sw/inc/PostItMgr.hxx | 4 sw/qa/extras/uiwriter/data/tdf163194-two-comments.fodt | 41 +++++ sw/qa/extras/uiwriter/uiwriter11.cxx | 136 +++++++++++++++++ sw/qa/extras/uiwriter/uiwriter8.cxx | 2 sw/source/core/view/vprint.cxx | 10 + sw/source/uibase/docvw/AnnotationWin2.cxx | 14 + sw/source/uibase/docvw/PostItMgr.cxx | 36 +++- 8 files changed, 229 insertions(+), 15 deletions(-)
New commits: commit cf586fe3037097aa4bfef27021248205b9ddee6c Author: Mike Kaganski <[email protected]> AuthorDate: Sat Jan 31 20:37:23 2026 +0500 Commit: Adolfo Jayme Barrientos <[email protected]> CommitDate: Sun Feb 1 04:23:40 2026 +0100 tdf#163194: Make width of comments in margin fixed on print / PDF export Previously, the width of the comments in margin on print / PDF export was calculated using the same width factor, as when shown in the UI. Before commit ac2720dcbe4e51e7f6733a385b5f7b571c6431e9 (tdf#73953 sw: Allow resizing the comment section, 2024-01-11), there was no way to change that, and the factor was hardcoded as 1.8 (and the print / PDF export implementation in SwViewShell::PrintOrPDFExport relied on that). The mentioned commit introduced a configuration DisplayWidthFactor, that stored the user-defined width factor; and then in commit cf9d8631ee5d4b894425446a9e6a8c939ab0309c (Related tdf#73953 Increase default comment width, 2024-01-11), its default value was increased to 3.0, which immediately affected the width of the comments in print and PDF output. The new default created comments that were too wide for the page, even with default DPI. There was another problem with existing implementation: the comment width depended on DPI. It meant, that when a HiDPI monotor was used, the comments printed / exported in margins were narrower, than when it was done using a standard-DPI monitor. On HiDPI systems, a larger width factor was necessary to see the "comment doesn't fit into the page" problem. Here, the old behavior is restored, where print and PDF output use a fixed value of the comment width factor. Also, the output width now doesn't depend on DPI. Two other possibilities were considered: 1. Keep using user-defined width factor, as in UI, and calculate the correct comment position, as well as original page scaling factor, to fit them all on the output page; 2. Introduce a new configuration, dedicated for width of comments in margins of pages in print / PDF export (and, again, calculate the layout using that factor). They both were rejected, because it doesn't make sense to reduce the original page size too much. Currently, the original page is reduced by factor of 0.75, to make room for the comments. Allowing more space for comments could easily make the page reduced to one quarter of the original size, or even smaller. And the text of comments will scale down as well, making it unreadable with too wide comments area. One problem that required solving was that dynamically changing the width factor changed sizes of the comments, and that needed to be restored (otherwise, exporting to PDF would change all UI sizes of comments). For that, a good guess of the final comment text height was needed; previously, it worked because comments were re-layouted several times before they were finally shown, and that compensated for the incorrect initial height used in SwPostItMgr::LayoutPostIts. But for print / output, where there is only one layout for output, and one layout for restoring the size, a new method was introduced in SwAnnotationWin, GuessTextHeightForWidth. This restores testTdf152575 to the original state before the commit cf9d8631ee5d4b894425446a9e6a8c939ab0309c. Change-Id: Ib0dd195d7594b51be86e489cc06cae00b26bf29b Reviewed-on: https://gerrit.libreoffice.org/c/core/+/198457 Reviewed-by: Mike Kaganski <[email protected]> Tested-by: Jenkins Reviewed-on: https://gerrit.libreoffice.org/c/core/+/198464 Reviewed-by: Adolfo Jayme Barrientos <[email protected]> diff --git a/sw/inc/AnnotationWin.hxx b/sw/inc/AnnotationWin.hxx index 9be34683fc3d..622cb88f7396 100644 --- a/sw/inc/AnnotationWin.hxx +++ b/sw/inc/AnnotationWin.hxx @@ -111,6 +111,7 @@ class SAL_DLLPUBLIC_RTTI SwAnnotationWin final : public InterimItemWindow ::sw::overlay::OverlayRanges* TextRange() { return mpTextRangeOverlay.get();} tools::Long GetPostItTextHeight(); + tools::Long GuessTextHeightForWidth(tools::Long nWidth) const; void SwitchToPostIt(sal_uInt16 aDirection); void SwitchToFieldPos(); diff --git a/sw/inc/PostItMgr.hxx b/sw/inc/PostItMgr.hxx index 7ff84952c887..11c68d0e0cb8 100644 --- a/sw/inc/PostItMgr.hxx +++ b/sw/inc/PostItMgr.hxx @@ -99,7 +99,7 @@ class SAL_DLLPUBLIC_RTTI SwPostItMgr final : public SfxListener, FieldShadowState mShadowState; std::optional<OutlinerParaObject> mpAnswer; OUString maAnswerText; - bool mbForceShow = false; + bool mbForceShowForPrintOrPdf = false; // data structure to collect the <SwAnnotationWin> instances for certain <SwFrame> instances. std::unique_ptr<sw::sidebarwindows::SwFrameSidebarWinContainer> mpFrameSidebarWinContainer; @@ -255,7 +255,7 @@ class SAL_DLLPUBLIC_RTTI SwPostItMgr final : public SfxListener, sw::sidebarwindows::SidebarPosition GetSidebarPos(const Point& rPointLogic); - void SetForceShow(bool bForce) { mbForceShow = bForce; } + void SetForceShowForPrintOrPdf(bool bForce) { mbForceShowForPrintOrPdf = bForce; } // The commands that directly delete comments (as opposed to deletion of the text that the // comments are anchored to) behave differently, depending on the document type, when the diff --git a/sw/qa/extras/uiwriter/data/tdf163194-two-comments.fodt b/sw/qa/extras/uiwriter/data/tdf163194-two-comments.fodt new file mode 100644 index 000000000000..ae280a0dd204 --- /dev/null +++ b/sw/qa/extras/uiwriter/data/tdf163194-two-comments.fodt @@ -0,0 +1,41 @@ +<?xml version="1.0" encoding="UTF-8"?> + +<office:document xmlns:office="urn:oasis:names:tc:opendocument:xmlns:office:1.0" xmlns:fo="urn:oasis:names:tc:opendocument:xmlns:xsl-fo-compatible:1.0" xmlns:dc="http://purl.org/dc/elements/1.1/"; xmlns:meta="urn:oasis:names:tc:opendocument:xmlns:meta:1.0" xmlns:style="urn:oasis:names:tc:opendocument:xmlns:style:1.0" xmlns:text="urn:oasis:names:tc:opendocument:xmlns:text:1.0" xmlns:svg="urn:oasis:names:tc:opendocument:xmlns:svg-compatible:1.0" office:version="1.4" office:mimetype="application/vnd.oasis.opendocument.text"> + <office:font-face-decls> + <style:font-face style:name="Liberation Serif" svg:font-family="'Liberation Serif'" style:font-family-generic="roman" style:font-pitch="variable"/> + </office:font-face-decls> + <office:styles> + <style:default-style style:family="paragraph"> + <style:paragraph-properties fo:orphans="2" fo:widows="2" style:text-autospace="ideograph-alpha" style:punctuation-wrap="hanging" style:line-break="strict" style:tab-stop-distance="12.51mm" style:writing-mode="page"/> + <style:text-properties style:font-name="Liberation Serif" fo:font-size="12pt" fo:language="en" fo:country="GB" style:letter-kerning="true"/> + </style:default-style> + <style:style style:name="Standard" style:family="paragraph" style:class="text"/> + <style:style style:name="Comment" style:family="paragraph" style:parent-style-name="Standard" style:class="extra"> + <style:paragraph-properties fo:margin-left="1mm" fo:margin-right="1mm" fo:margin-top="1mm" fo:margin-bottom="0mm" style:contextual-spacing="false" fo:line-height="100%" fo:text-indent="0mm" style:auto-text-indent="false"/> + <style:text-properties fo:font-size="10pt"/> + </style:style> + </office:styles> + <office:automatic-styles> + <style:page-layout style:name="pm1"> + <style:page-layout-properties fo:page-width="210mm" fo:page-height="297mm" style:print-orientation="portrait" fo:margin-top="20mm" fo:margin-bottom="20mm" fo:margin-left="20mm" fo:margin-right="20mm"/> + </style:page-layout> + </office:automatic-styles> + <office:master-styles> + <style:master-page style:name="Standard" style:page-layout-name="pm1"/> + </office:master-styles> + <office:body> + <office:text> + <text:p>He heard quiet steps behind him<office:annotation> + <dc:creator>Mike</dc:creator> + <dc:date>2026-01-31T17:49:06.393884900</dc:date> + <meta:creator-initials>M</meta:creator-initials> + <text:p text:style-name="Comment">A comment. One two three four five six seven eight nine ten eleven twelve thirteen fourteen fifteen sixteen seventeen eighteen nineteen twenty.</text:p> + </office:annotation>. That didn't bode well. Who could be following him this late at night and in this deadbeat part of town? And at this particular moment, just after he pulled off the big time and was making off with the greenbacks<office:annotation> + <dc:creator>Mike</dc:creator> + <dc:date>2026-01-31T17:51:06.483107200</dc:date> + <meta:creator-initials>M</meta:creator-initials> + <text:p text:style-name="Comment">Another comment. Twenty-one twenty-two twenty-three twenty-four twenty-five twenty-six twenty-seven twenty-eight twenty-nine thirty.</text:p> + </office:annotation>. Was there another crook who'd had the same idea, and was now watching him and waiting for a chance to grab the fruit of his labour? Or did the steps behind him mean that one of many law officers in town was on to him and just waiting to pounce and snap those cuffs on his wrists? He nervously looked all around. Suddenly he saw the alley. Like lightning he darted off to the left and disappeared between the two warehouses almost falling over the bin lying in the middle of the pavement. He tried to nervously tap his way along in the inky darkness and suddenly stiffened: it was a dead-end, he would have to go back the way he had come. The steps got louder and louder, he saw the black outline of a figure coming around the corner. Is this the end of the line? he thought pressing himself back against the wall trying to make himself invisible in the dark, was all that planning and energy wasted? He was dripping with sweat now, cold and wet, he could smell the fear coming off his clothes. Suddenly next to him, with a barely noticeable squeak, a door swung quietly to and fro in the night's breeze. Could this be the haven he'd prayed for? Slowly he slid toward the door, pressing himself more and more into the wall, into the dark, away from his enemy. Would this door save his hide?</text:p> + </office:text> + </office:body> +</office:document> \ No newline at end of file diff --git a/sw/qa/extras/uiwriter/uiwriter11.cxx b/sw/qa/extras/uiwriter/uiwriter11.cxx index dfe2c60ffee5..d04cd758dd06 100644 --- a/sw/qa/extras/uiwriter/uiwriter11.cxx +++ b/sw/qa/extras/uiwriter/uiwriter11.cxx @@ -8,6 +8,9 @@ */ #include <swmodeltestbase.hxx> + +#include <officecfg/Office/Writer.hxx> +#include <vcl/pdf/PDFPageObjectType.hxx> #include <vcl/scheduler.hxx> #include <comphelper/propertyvalue.hxx> @@ -425,6 +428,139 @@ CPPUNIT_TEST_FIXTURE(SwUiWriterTest11, testExtrudedShapeSelection) CPPUNIT_ASSERT(xSelections.is()); } +CPPUNIT_TEST_FIXTURE(SwUiWriterTest11, testTdf163194) +{ + // Test (1) that exporting comments in margin to PDF produces expected layout of the comments, + // that have limited and reasonable width and position, inside the page bounds (and close to + // its right side), independent on the manually set comment sidebar width; and (2) that the + // export doesn't change the annotation sizes in the document. + + // Annotation size depends on DisplayWidthFactor. Set it to a fixed value for testing. + comphelper::ScopeGuard + aReset([oldValue = officecfg::Office::Writer::Notes::DisplayWidthFactor::get()]() { + auto pChanges(comphelper::ConfigurationChanges::create()); + officecfg::Office::Writer::Notes::DisplayWidthFactor::set(oldValue, pChanges); + pChanges->commit(); + }); + { + auto pChanges(comphelper::ConfigurationChanges::create()); + officecfg::Office::Writer::Notes::DisplayWidthFactor::set(4.0, pChanges); + pChanges->commit(); + } + + createSwDoc("tdf163194-two-comments.fodt"); + + SwDocShell* pDocShell = getSwDocShell(); + CPPUNIT_ASSERT(pDocShell); + SwView* pView = pDocShell->GetView(); + CPPUNIT_ASSERT(pView); + SwPostItMgr* pPostItMgr = pView->GetPostItMgr(); + CPPUNIT_ASSERT(pPostItMgr); + + CPPUNIT_ASSERT_EQUAL(size_t(2), pPostItMgr->GetPostItFields().size()); + std::vector<tools::Long> aOriginalHeights; + for (const auto& pAnnotationItem : pPostItMgr->GetPostItFields()) + { + CPPUNIT_ASSERT(pAnnotationItem); + CPPUNIT_ASSERT(pAnnotationItem->mpPostIt); + const Size aSize = pAnnotationItem->mpPostIt->GetSizePixel(); + // Pixel width depends on DisplayWidthFactor, seems to not depend on DPI + CPPUNIT_ASSERT_EQUAL(tools::Long(400), aSize.Width()); + // Heights depend on width and current DPI scaling; just remember them for later comparison + aOriginalHeights.push_back(aSize.Height()); + } + + // Export to PDF with comments in margin + uno::Sequence aFilterData{ comphelper::makePropertyValue(u"ExportNotes"_ustr, false), + comphelper::makePropertyValue(u"ExportNotesInMargin"_ustr, true) }; + uno::Sequence aDescriptor{ comphelper::makePropertyValue(u"FilterData"_ustr, aFilterData), + comphelper::makePropertyValue(u"URL"_ustr, maTempFile.GetURL()) }; + dispatchCommand(mxComponent, u".uno:ExportToPDF"_ustr, aDescriptor); + + if (auto pPdfDocument = parsePDFExport()) // This part will be skipped without PDFium + { + CPPUNIT_ASSERT_EQUAL(1, pPdfDocument->getPageCount()); + auto pPage = pPdfDocument->openPage(0); + CPPUNIT_ASSERT(pPage); + // 595 pt corresponts to 210 mm (withh of A4) + CPPUNIT_ASSERT_DOUBLES_EQUAL(595, pPage->getWidth(), 1.0); + auto pTextPage = pPage->getTextPage(); + CPPUNIT_ASSERT(pTextPage); + + // There should be two filled path objects corresponding to the two annotations + int nPathCount = 0; + + // Check that there are all the expected lines of the annotations, i.e. that the layout + // of the comments is stable and independent of the DPI. + const OUString aLines[] = { + // First annotation + u"A comment. One two three four "_ustr, + u"five six seven eight nine ten "_ustr, + u"eleven twelve thirteen fourteen "_ustr, + u"fifteen sixteen seventeen "_ustr, + u"eighteen nineteen twenty."_ustr, + // Second annotation + u"Another comment. Twenty-one "_ustr, + u"twenty-two twenty-three "_ustr, + u"twenty-four twenty-five twenty-"_ustr, + u"six twenty-seven twenty-eight "_ustr, + u"twenty-nine thirty."_ustr, + }; + std::set<OUString> aFoundLines; + + for (int i = 0; i < pPage->getObjectCount(); ++i) + { + auto pObject = pPage->getObject(i); + + if (pObject->getType() == vcl::pdf::PDFPageObjectType::Path + && pObject->getPathSegmentCount() == 5) + { + // This is the filled rectangle of an annotation. I hope that path segment count + // is stable and unique enough to identify it. + CPPUNIT_ASSERT(pObject->getFillColor() != COL_TRANSPARENT); + basegfx::B2DRectangle bounds = pObject->getBounds(); + // The object must start at position 448, and have width 101 (so its right + // edge is ~at position 549, within the page's width of 595). + // Without the fix, this failed like "Expected: 101; Actual: 225", i.e. its + // right edge protruded beyond the right page limit (and generally depended + // on the UI width of the comment sidebar). + CPPUNIT_ASSERT_DOUBLES_EQUAL(101, bounds.getWidth(), 1.0); + CPPUNIT_ASSERT_DOUBLES_EQUAL(448, bounds.getMinX(), 1.0); + ++nPathCount; + } + else if (pObject->getType() == vcl::pdf::PDFPageObjectType::Text) + { + // This is text; check if it matches expected annotation lines + OUString aText = pObject->getText(pTextPage); + if (std::ranges::find(aLines, aText) != std::end(aLines)) + { + // Check that it fits into the expected horizontal range of the comment + basegfx::B2DRectangle bounds = pObject->getBounds(); + CPPUNIT_ASSERT_LESS(101.0, bounds.getWidth()); + CPPUNIT_ASSERT_DOUBLES_EQUAL(450, bounds.getMinX(), 1.0); + + CPPUNIT_ASSERT(!aFoundLines.contains(aText)); // each line only once + aFoundLines.insert(aText); + } + } + } + CPPUNIT_ASSERT_EQUAL(2, nPathCount); // all annotation rectangles + CPPUNIT_ASSERT_EQUAL(std::size(aLines), aFoundLines.size()); // all annotation lines + } + + // Test that export didn't change the annotation sizes + CPPUNIT_ASSERT_EQUAL(size_t(2), pPostItMgr->GetPostItFields().size()); + for (size_t i = 0; i < 2; ++i) + { + const auto& pAnnotationItem = pPostItMgr->GetPostItFields()[i]; + CPPUNIT_ASSERT(pAnnotationItem); + CPPUNIT_ASSERT(pAnnotationItem->mpPostIt); + const Size aSize = pAnnotationItem->mpPostIt->GetSizePixel(); + CPPUNIT_ASSERT_EQUAL(tools::Long(400), aSize.Width()); + CPPUNIT_ASSERT_EQUAL(aOriginalHeights[i], aSize.Height()); + } +} + } // end of anonymous namespace CPPUNIT_PLUGIN_IMPLEMENT(); diff --git a/sw/qa/extras/uiwriter/uiwriter8.cxx b/sw/qa/extras/uiwriter/uiwriter8.cxx index aebb38aa28b0..4fd3027301c8 100644 --- a/sw/qa/extras/uiwriter/uiwriter8.cxx +++ b/sw/qa/extras/uiwriter/uiwriter8.cxx @@ -831,7 +831,7 @@ CPPUNIT_TEST_FIXTURE(SwUiWriterTest8, testTdf152575) std::unique_ptr<vcl::pdf::PDFiumPage> pPdfPage = pPdfDocument->openPage(/*nIndex=*/1); CPPUNIT_ASSERT(pPdfPage); // Without the fix for tdf#152575 this would be only 42 objects - CPPUNIT_ASSERT_EQUAL(50, pPdfPage->getObjectCount()); + CPPUNIT_ASSERT_EQUAL(51, pPdfPage->getObjectCount()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest8, testTdf140731) diff --git a/sw/source/core/view/vprint.cxx b/sw/source/core/view/vprint.cxx index ac4d85997fd0..a349820ba6a8 100644 --- a/sw/source/core/view/vprint.cxx +++ b/sw/source/core/view/vprint.cxx @@ -520,12 +520,18 @@ bool SwViewShell::PrintOrPDFExport( if (pPostItManager) { - pPostItManager->SetForceShow(true); + pPostItManager->SetForceShowForPrintOrPdf(true); pPostItManager->CalcRects(); pPostItManager->LayoutPostIts(); pPostItManager->DrawNotesForPage(pOutDev, nPage-1); oOrigHeight.emplace(pStPage->getFrameArea().Height()); - pPostItManager->SetForceShow(false); + pPostItManager->SetForceShowForPrintOrPdf(false); + if (pPostItManager->ShowNotes()) + { + // In Print/Pdf mode, LayoutPostIts used a fixed sidebar width. Now restore the + // layout with the normal (user-defined) sidebar width. + pPostItManager->LayoutPostIts(); + } } } diff --git a/sw/source/uibase/docvw/AnnotationWin2.cxx b/sw/source/uibase/docvw/AnnotationWin2.cxx index 1b0137a4e01d..f665c6e9f22a 100644 --- a/sw/source/uibase/docvw/AnnotationWin2.cxx +++ b/sw/source/uibase/docvw/AnnotationWin2.cxx @@ -1196,6 +1196,20 @@ tools::Long SwAnnotationWin::GetPostItTextHeight() return mpOutliner ? LogicToPixel(mpOutliner->CalcTextSize()).Height() : 0; } +// Provides an estimation for the text height given a specific width of the annotation window. +// It doesn't calculate it accurately, e.g. it doesn't take scrollbars into account (see +// SwAnnotationWin::DoResize for more details of accurate calculation). Even though it avoids +// some calculations, it may still be quite expensive for large text. +tools::Long SwAnnotationWin::GuessTextHeightForWidth(tools::Long nWidth) const +{ + if (!mpOutliner) + return 0; + comphelper::ScopeGuard resetPaperSize([this, curSize = mpOutliner->GetPaperSize()]() + { mpOutliner->SetPaperSize(curSize); }); + mpOutliner->SetPaperSize(PixelToLogic(Size(nWidth, SAL_MAX_INT32))); + return LogicToPixel(mpOutliner->CalcTextSize()).Height(); +} + void SwAnnotationWin::SwitchToPostIt(sal_uInt16 aDirection) { SwAnnotationWin* pPostIt = mrMgr.GetNextPostIt(aDirection, this); diff --git a/sw/source/uibase/docvw/PostItMgr.cxx b/sw/source/uibase/docvw/PostItMgr.cxx index f5edf6fb607e..e201a5384634 100644 --- a/sw/source/uibase/docvw/PostItMgr.cxx +++ b/sw/source/uibase/docvw/PostItMgr.cxx @@ -981,6 +981,7 @@ void SwPostItMgr::LayoutPostIts() // - place SwPostIts on their initial position // - calculate necessary height for all PostIts together bool bUpdate = false; + const tools::Long nSidebarWidth = GetSidebarWidth(true); for (std::unique_ptr<SwPostItPageItem>& pPage : mPages) { // only layout if there are notes on this page @@ -1019,7 +1020,7 @@ void SwPostItMgr::LayoutPostIts() if (pPage->eSidebarPosition == sw::sidebarwindows::SidebarPosition::LEFT ) { // x value for notes positioning - mlPageBorder = mpEditWin->LogicToPixel( Point( pPage->mPageRect.Left(), 0)).X() - GetSidebarWidth(true);// - GetSidebarBorderWidth(true); + mlPageBorder = mpEditWin->LogicToPixel(Point(pPage->mPageRect.Left(), 0)).X() - nSidebarWidth;// - GetSidebarBorderWidth(true); //bending point mlPageEnd = mpWrtShell->getIDocumentSettingAccess().get(DocumentSettingId::BROWSE_MODE) @@ -1039,13 +1040,18 @@ void SwPostItMgr::LayoutPostIts() tools::Long Y = mpEditWin->LogicToPixel( Point(0,pItem->maLayoutInfo.mPosition.Bottom())).Y(); + // Without taking new width into account, the text height will be wrong. + // GuessTextHeightForWidth is expensive, only use it when necessary. + tools::Long nTextHeight; + if (pPostIt->GetSizePixel().Width() == nSidebarWidth) + nTextHeight = pPostIt->GetPostItTextHeight(); + else + nTextHeight = pPostIt->GuessTextHeightForWidth(nSidebarWidth); + tools::Long postItPixelTextHeight = (comphelper::LibreOfficeKit::isActive() - ? mpEditWin - ->LogicToPixel( - Point(0, pPostIt->GetPostItTextHeight())) - .Y() - : pPostIt->GetPostItTextHeight()); + ? mpEditWin->LogicToPixel(Point(0, nTextHeight)).Y() + : nTextHeight); aPostItHeight = (postItPixelTextHeight < pPostIt->GetMinimumSizeWithoutMeta() ? pPostIt->GetMinimumSizeWithoutMeta() @@ -1053,7 +1059,7 @@ void SwPostItMgr::LayoutPostIts() + pPostIt->GetMetaHeight(); pPostIt->SetPosSizePixelRect( mlPageBorder , Y - GetInitialAnchorDistance(), - GetSidebarWidth(true), + nSidebarWidth, aPostItHeight, mlPageEnd ); } @@ -2418,7 +2424,7 @@ void SwPostItMgr::CorrectPositions() bool SwPostItMgr::ShowNotes() const { // we only want to see notes if Options - Writer - View - Notes is ticked - return mbForceShow || mpWrtShell->GetViewOptions()->IsPostIts(); + return mbForceShowForPrintOrPdf || mpWrtShell->GetViewOptions()->IsPostIts(); } bool SwPostItMgr::HasNotes() const @@ -2472,8 +2478,18 @@ tools::ULong SwPostItMgr::GetSidebarWidth(bool bPx) const double fScaleX = double(mpWrtShell->GetOut()->GetMapMode().GetScaleX()); nZoom = fScaleX * 100; } - tools::ULong aWidth = static_cast<tools::ULong>( - nZoom * officecfg::Office::Writer::Notes::DisplayWidthFactor::get()); + double fDisplayWidthFactor; + if (mbForceShowForPrintOrPdf) + { + // 1.8 is the fixed factor that empirically matches (at 96 PPI) the 0.75 scale applied to + // the page in SwViewShell::PrintOrPDFExport for "print in margins" mode. + fDisplayWidthFactor = 1.8 * (Application::GetDefaultDevice()->GetDPIX() / 96.0); + } + else + { + fDisplayWidthFactor = officecfg::Office::Writer::Notes::DisplayWidthFactor::get(); + } + tools::ULong aWidth = static_cast<tools::ULong>(nZoom * fDisplayWidthFactor); if (bPx) return aWidth;
