vcl/source/gdi/outdev3.cxx | 203 ++++++++++++++++++++-------------------------
vcl/source/gdi/print.cxx | 107 ++++-------------------
2 files changed, 113 insertions(+), 197 deletions(-)
New commits:
commit 9b73b036971a5b13209b5f617b7d1368aece0815
Author: Philipp Weissenbacher <p.weissenbac...@gmail.com>
Date: Tue Apr 9 21:11:26 2013 +0200
Translate German comments and general clean-up
Removed some whitespace, programmer handles in comments and
commented out code.
Change-Id: I68a1285355b14e122f218b2f483ebc74a2b2dbaf
Reviewed-on: https://gerrit.libreoffice.org/3294
Reviewed-by: Miklos Vajna <vmik...@suse.cz>
Tested-by: Miklos Vajna <vmik...@suse.cz>
diff --git a/vcl/source/gdi/outdev3.cxx b/vcl/source/gdi/outdev3.cxx
index e47acb0..1c5f819 100644
--- a/vcl/source/gdi/outdev3.cxx
+++ b/vcl/source/gdi/outdev3.cxx
@@ -279,7 +279,7 @@ void OutputDevice::ImplUpdateAllFontData( bool
bNewFontLists )
{
if ( pFrame->ImplGetGraphics() )
{
- // MT: Stupid typecast here and somewhere
((OutputDevice*)&aVDev)->, because bug in .NET2002 compiler.
+ // Stupid typecast here and somewhere
((OutputDevice*)&aVDev)->, because bug in .NET2002 compiler
OutputDevice *pDevice = (OutputDevice*)pFrame;
pDevice->mpGraphics->ClearDevFontCache();
pDevice->mpGraphics->GetDevFontList(pFrame->mpWindowImpl->mpFrameData->mpFontList);
@@ -483,7 +483,7 @@ Font OutputDevice::GetDefaultFont( sal_uInt16 nType,
LanguageType eLang,
case DEFAULTFONT_CJK_SPREADSHEET:
case DEFAULTFONT_CJK_HEADING:
case DEFAULTFONT_CJK_DISPLAY:
- aFont.SetFamily( FAMILY_SYSTEM ); // don't care, but don't use
font subst config later...
+ aFont.SetFamily( FAMILY_SYSTEM ); // don't care, but don't use
font subst config later...
break;
case DEFAULTFONT_CTL_TEXT:
@@ -491,7 +491,7 @@ Font OutputDevice::GetDefaultFont( sal_uInt16 nType,
LanguageType eLang,
case DEFAULTFONT_CTL_SPREADSHEET:
case DEFAULTFONT_CTL_HEADING:
case DEFAULTFONT_CTL_DISPLAY:
- aFont.SetFamily( FAMILY_SYSTEM ); // don't care, but don't use
font subst config later...
+ aFont.SetFamily( FAMILY_SYSTEM ); // don't care, but don't use
font subst config later...
break;
}
@@ -1026,7 +1026,7 @@ bool ImplDevFontListData::AddFontFace( PhysicalFontFace*
pNewData )
// TODO: is it cheaper to calc matching attributes now or on demand?
// calc matching attributes if other entries are already initialized
- // MT: Perform05: Do lazy, quite expensive, not needed in start-up!
+ // Do lazy, quite expensive, not needed in start-up!
// const FontSubstConfiguration& rFontSubst =
*FontSubstConfiguration::get();
// InitMatchData( rFontSubst, maSearchName );
// mbMatchData=true; // Somewhere else???
@@ -1101,7 +1101,7 @@ PhysicalFontFace* ImplDevFontListData::FindBestFontFace(
const FontSelectPattern
&& rSearchName.Equals( maSearchName, 0, maSearchName.Len() ) )
pTargetStyleName = rSearchName.GetBuffer() + maSearchName.Len() + 1;
- // linear search, TODO: improve?
+ // TODO: linear search improve!
PhysicalFontFace* pFontFace = mpFirst;
PhysicalFontFace* pBestFontFace = pFontFace;
FontMatchStatus aFontMatchStatus = {0,0,0, pTargetStyleName};
@@ -1228,7 +1228,7 @@ void ImplDevFontList::InitGenericGlyphFallback( void )
const
for( const char** ppNames = &aGlyphFallbackList[0];; ++ppNames )
{
// advance to next sub-list when end-of-sublist marker
- if( !**ppNames ) // #i46456# check for empty string, i.e., deref
string itself not only ptr to it
+ if( !**ppNames ) // #i46456# check for empty string, i.e., deref
string itself not only ptr to it
{
if( nBestQuality > 0 )
if( ++nMaxLevel >= MAX_FALLBACK )
@@ -1330,11 +1330,11 @@ ImplDevFontListData*
ImplDevFontList::GetGlyphFallbackFont( FontSelectPattern& r
else
rFontSelData.maSearchName = OUString();
- //See fdo#32665 for an example. FreeSerif that has glyphs in normal
- //font, but not in the italic or bold version
+ // See fdo#32665 for an example. FreeSerif that has glyphs in
normal
+ // font, but not in the italic or bold version
bool bSubSetOfFontRequiresPropertyFaking = rFontSelData.mbEmbolden
|| rFontSelData.maItalicMatrix != ItalicMatrix();
- // cache the result even if there was no match, unless its from
part of a font for which the properties need
+ // Cache the result even if there was no match, unless its from
part of a font for which the properties need
// to be faked. We need to rework this cache to take into account
that fontconfig can return different fonts
// for different input sizes, weights, etc. Basically the cache is
way to naive
if (!bSubSetOfFontRequiresPropertyFaking)
@@ -1455,7 +1455,7 @@ ImplDevFontListData*
ImplDevFontList::ImplFindByAliasName(const OUString& rSearc
ImplDevFontListData* ImplDevFontList::FindFontFamily( const String& rFontName
) const
{
- // normalize the font fomily name and
+ // normalize the font family name and
OUString aName = rFontName;
GetEnglishSearchFontName( aName );
ImplDevFontListData* pFound = ImplFindBySearchName( aName );
@@ -1736,7 +1736,7 @@ ImplDevFontListData*
ImplDevFontList::ImplFindByAttributes( sal_uLong nSearchTyp
nTestMatch -= 1000000;
// test font name substrings
- // TODO: calculate name matching score using e.g. Levenstein distance
+ // TODO: calculate name matching score using e.g. Levenstein distance
if( (rSearchFamilyName.getLength() >= 4) &&
(pData->maMatchFamilyName.Len() >= 4)
&& ((rSearchFamilyName.indexOf( pData->maMatchFamilyName ) != -1)
|| (pData->maMatchFamilyName.Search( rSearchFamilyName ) !=
STRING_NOTFOUND)) )
@@ -1945,7 +1945,6 @@ ImplDevFontListData* ImplDevFontList::FindDefaultFont()
const
ImplDevFontList* ImplDevFontList::Clone( bool bScalable, bool bEmbeddable )
const
{
ImplDevFontList* pClonedList = new ImplDevFontList;
-// pClonedList->mbMatchData = mbMatchData;
pClonedList->mbMapNames = mbMapNames;
pClonedList->mpPreMatchHook = mpPreMatchHook;
pClonedList->mpFallbackHook = mpFallbackHook;
@@ -2156,7 +2155,7 @@ bool ImplFontCache::IFSD_Equal::operator()(const
FontSelectPattern& rA, const Fo
// check font face attributes
if( (rA.GetWeight() != rB.GetWeight())
|| (rA.GetSlant() != rB.GetSlant())
-// || (rA.meFamily != rB.meFamily) // TODO: remove this mostly
obsolete member
+// || (rA.meFamily != rB.meFamily) // TODO: remove this mostly
obsolete member
|| (rA.GetPitch() != rB.GetPitch()) )
return false;
@@ -2318,8 +2317,8 @@ namespace
{
OUString stripCharSetFromName(OUString aName)
{
- //I worry that someone will have a font which *does* have
- //e.g. "Greek" legitimately at the end of its name :-(
+ // I worry that someone will have a font which *does* have
+ // e.g. "Greek" legitimately at the end of its name :-(
const char*suffixes[] =
{
" baltic",
@@ -2333,7 +2332,7 @@ namespace
" (vietnamese)"
};
- //These can be crazily piled up, e.g. Times New Roman CYR Greek
+ // These can be crazily piled up, e.g. Times New Roman CYR Greek
bool bFinished = false;
while (!bFinished)
{
@@ -2435,10 +2434,10 @@ ImplDevFontListData* ImplDevFontList::ImplFindByFont(
FontSelectPattern& rFSD,
rFSD.maTargetName = aBaseFontName;
#endif
- //Related: fdo#49271 RTF files often contain weird-ass
- //Win 3.1/Win95 style fontnames which attempt to put the
- //charset encoding into the filename
- //http://www.webcenter.ru/~kazarn/eng/fonts_ttf.htm
+ // Related: fdo#49271 RTF files often contain weird-ass
+ // Win 3.1/Win95 style fontnames which attempt to put the
+ // charset encoding into the filename
+ // http://www.webcenter.ru/~kazarn/eng/fonts_ttf.htm
OUString sStrippedName = stripCharSetFromName(rFSD.maTargetName);
if (!sStrippedName.equals(rFSD.maTargetName))
{
@@ -2513,7 +2512,6 @@ ImplDevFontListData* ImplDevFontList::ImplFindByFont(
FontSelectPattern& rFSD,
eSearchWeight, eSearchWidth,
nSearchType );
// note: the search name was already translated to english (if possible)
-
// use the font's shortened name if needed
if ( aSearchShortName != aSearchName )
{
@@ -2595,7 +2593,6 @@ ImplDevFontListData* ImplDevFontList::ImplFindByFont(
FontSelectPattern& rFSD,
}
// use a font name from font fallback list to determine font attributes
-
// get fallback info using FontSubstConfiguration and
// the target name, it's shortened name and family name in that order
const FontSubstConfiguration& rFontSubst =
FontSubstConfiguration::get();
@@ -3449,7 +3446,7 @@ void OutputDevice::ImplDrawWaveLine( long nBaseX, long
nBaseY,
long nStartX = nBaseX + nDistX;
long nStartY = nBaseY + nDistY;
- // Bei Hoehe von 1 Pixel reicht es, eine Linie auszugeben
+ // If the height is 1 pixel, it's enough ouput a line
if ( (nLineWidth == 1) && (nHeight == 1) )
{
mpGraphics->SetLineColor( ImplColorToSal( rColor ) );
@@ -3477,7 +3474,7 @@ void OutputDevice::ImplDrawWaveLine( long nBaseX, long
nBaseY,
long nPixWidth;
long nPixHeight;
sal_Bool bDrawPixAsRect;
- // Auf Druckern die Pixel per DrawRect() ausgeben
+ // On printers that ouput pixel via DrawRect()
if ( (GetOutDevType() == OUTDEV_PRINTER) || (nLineWidth > 1) )
{
if ( mbLineColor || mbInitLineColor )
@@ -3759,9 +3756,8 @@ void OutputDevice::ImplDrawStraightTextLine( long nBaseX,
long nBaseY,
}
nDashWidth = ((nDashWidth*mnDPIX)+1270)/2540;
nSpaceWidth = ((nSpaceWidth*mnDPIX)+1270)/2540;
- // DashWidth wird gegebenenfalls verbreitert, wenn
- // die dicke der Linie im Verhaeltnis zur Laenge
- // zu dick wird
+ // DashWidth will be increased if the line is getting too
thick
+ // in proportion to the line's length
if ( nDashWidth < nMinDashWidth )
nDashWidth = nMinDashWidth;
if ( nSpaceWidth < nMinSpaceWidth )
@@ -3785,9 +3781,8 @@ void OutputDevice::ImplDrawStraightTextLine( long nBaseX,
long nBaseY,
nDotWidth /= mnDPIY;
long nDashWidth = ((100*mnDPIX)+1270)/2540;
long nMinDashWidth = nDotWidth*4;
- // DashWidth wird gegebenenfalls verbreitert, wenn
- // die dicke der Linie im Verhaeltnis zur Laenge
- // zu dick wird
+ // DashWidth will be increased if the line is getting too
thick
+ // in proportion to the line's length
if ( nDashWidth < nMinDashWidth )
nDashWidth = nMinDashWidth;
long nTempDotWidth = nDotWidth;
@@ -3816,9 +3811,8 @@ void OutputDevice::ImplDrawStraightTextLine( long nBaseX,
long nBaseY,
nDotWidth /= mnDPIY;
long nDashWidth = ((100*mnDPIX)+1270)/2540;
long nMinDashWidth = nDotWidth*4;
- // DashWidth wird gegebenenfalls verbreitert, wenn
- // die dicke der Linie im Verhaeltnis zur Laenge
- // zu dick wird
+ // DashWidth will be increased if the line is getting too
thick
+ // in proportion to the line's length
if ( nDashWidth < nMinDashWidth )
nDashWidth = nMinDashWidth;
long nTempDotWidth = nDotWidth;
@@ -3918,8 +3912,8 @@ void OutputDevice::ImplDrawStrikeoutChar( long nBaseX,
long nBaseY,
FontStrikeout eStrikeout,
Color aColor )
{
- //See qadevOOo/testdocs/StrikeThrough.odt for examples if you need
- //to tweak this
+ // See qadevOOo/testdocs/StrikeThrough.odt for examples if you need
+ // to tweak this
if (!nWidth)
return;
@@ -4080,8 +4074,9 @@ void OutputDevice::ImplDrawTextLines( SalLayout&
rSalLayout,
if( bWordLine )
{
// draw everything relative to the layout base point
- const Point aStartPt = rSalLayout.DrawBase();
- // calculate distance of each word from the base point
+ const Point aStartPt = rSalLayout.DrawBase();
+
+ // calculate distance of each word from the base point
Point aPos;
sal_Int32 nDist = 0, nWidth = 0, nAdvance=0;
for( int nStart = 0;;)
@@ -4111,7 +4106,7 @@ void OutputDevice::ImplDrawTextLines( SalLayout&
rSalLayout,
}
else if( nWidth > 0 )
{
- // draw the textline for each word
+ // draw the textline for each word
ImplDrawTextLine( aStartPt.X(), aStartPt.Y(), nDist, nWidth,
eStrikeout, eUnderline, eOverline, bUnderlineAbove );
nWidth = 0;
@@ -4212,7 +4207,7 @@ void OutputDevice::ImplGetEmphasisMark( PolyPolygon&
rPolyPoly, sal_Bool& rPolyL
Polygon aPoly( Point( nRad, nRad ), nRad, nRad );
rPolyPoly.Insert( aPoly );
}
- rYOff = ((nHeight*250)/1000)/2; // Center to the anthoer
EmphasisMarks
+ rYOff = ((nHeight*250)/1000)/2; // Center to the another
EmphasisMarks
rWidth = nDotSize;
break;
@@ -4524,9 +4519,8 @@ void OutputDevice::ImplDrawTextDirect( SalLayout&
rSalLayout, sal_Bool bTextLine
}
else if( IsRTLEnabled() )
{
- //long w = meOutDevType == OUTDEV_VIRDEV ? mnOutWidth :
mpGraphics->GetGraphicsWidth();
- //long x = rSalLayout.DrawBase().X();
OutputDevice *pOutDevRef = (OutputDevice *)this;
+
// mirror this window back
long devX = pOutDevRef->mnOutOffX; // re-mirrored mnOutOffX
rSalLayout.DrawBase().X() = pOutDevRef->mnOutWidth - 1 -
(rSalLayout.DrawBase().X() - devX) + devX;
@@ -4730,25 +4724,24 @@ long OutputDevice::ImplGetTextLines(
ImplMultiTextLineInfo& rLineInfo,
const com::sun::star::lang::Locale&
rDefLocale(Application::GetSettings().GetUILanguageTag().getLocale());
xub_StrLen nSoftBreak = _rLayout.GetTextBreak( rStr,
nWidth, nPos, nBreakPos - nPos );
DBG_ASSERT( nSoftBreak < nBreakPos, "Break?!" );
- //aHyphOptions.hyphenIndex = nSoftBreak;
i18n::LineBreakResults aLBR = xBI->getLineBreak( aText,
nSoftBreak, rDefLocale, nPos, aHyphOptions, aUserOptions );
nBreakPos = (xub_StrLen)aLBR.breakIndex;
if ( nBreakPos <= nPos )
nBreakPos = nSoftBreak;
if ( (nStyle & TEXT_DRAW_WORDBREAK_HYPHENATION) ==
TEXT_DRAW_WORDBREAK_HYPHENATION )
{
- // Egal ob Trenner oder nicht: Das Wort nach dem
Trenner durch
- // die Silbentrennung jagen...
- // nMaxBreakPos ist das letzte Zeichen was in die
Zeile passt,
- // nBreakPos ist der Wort-Anfang
- // Ein Problem gibt es, wenn das Dok so schmal ist,
dass ein Wort
- // auf mehr als Zwei Zeilen gebrochen wird...
+ // Whether hyphen or not: Put the word after the
hyphen through
+ // word boundary.
+ //
+ // nMaxBreakPos the last char that fits into the line
+ // nBreakPos is the word's start
+ //
+ // We run into a problem if the doc is so narrow, that
a word
+ // is broken into more than two lines ...
if ( xHyph.is() )
{
sal_Unicode cAlternateReplChar = 0;
i18n::Boundary aBoundary = xBI->getWordBoundary(
aText, nBreakPos, rDefLocale,
::com::sun::star::i18n::WordType::DICTIONARY_WORD, sal_True );
- // sal_uInt16 nWordStart = nBreakPos;
- // sal_uInt16 nBreakPos_OLD = nBreakPos;
sal_Int32 nWordStart = nPos;
sal_Int32 nWordEnd = (sal_Int32) aBoundary.endPos;
DBG_ASSERT( nWordEnd > nWordStart, "ImpBreakLine:
Start >= End?" );
@@ -4759,7 +4752,7 @@ long OutputDevice::ImplGetTextLines(
ImplMultiTextLineInfo& rLineInfo,
// #104415# May happen, because getLineBreak
may differ from getWordBoudary with DICTIONARY_WORD
// DBG_ASSERT( nWordEnd >= nMaxBreakPos,
"Hyph: Break?" );
String aWord( aText, nWordStart, nWordLen );
- sal_uInt16 nMinTrail =
static_cast<sal_uInt16>(nWordEnd-nSoftBreak+1); //+1: Vor dem angeknacksten
Buchstaben
+ sal_uInt16 nMinTrail =
static_cast<sal_uInt16>(nWordEnd-nSoftBreak+1); //+1: Before the "broken off"
char
uno::Reference< linguistic2::XHyphenatedWord >
xHyphWord;
if (xHyph.is())
xHyphWord = xHyph->hyphenate( aWord,
rDefLocale, aWord.Len() - nMinTrail, uno::Sequence< beans::PropertyValue >() );
@@ -4778,27 +4771,27 @@ long OutputDevice::ImplGetTextLines(
ImplMultiTextLineInfo& rLineInfo,
{
String aAlt(
xHyphWord->getHyphenatedWord() );
- // Wir gehen von zwei Faellen aus,
die nun
- // vorliegen koennen:
- // 1) packen wird zu pak-ken
- // 2) Schiffahrt wird zu
Schiff-fahrt
- // In Fall 1 muss ein Zeichen
ersetzt werden,
- // in Fall 2 wird ein Zeichen
hinzugefuegt.
- // Die Identifikation wird
erschwert durch Worte wie
- // "Schiffahrtsbrennesseln", da
der Hyphenator alle
- // Position des Wortes auftrennt
und "Schifffahrtsbrennnesseln"
- // ermittelt. Wir koennen also
eigentlich nicht unmittelbar vom
- // Index des AlternativWord auf
aWord schliessen.
-
- // Das ganze geraffel wird durch
eine Funktion am
- // Hyphenator vereinfacht werden,
sobald AMA sie einbaut...
+ // We can have two cases:
+ // 1) "packen" turns into "pak-ken"
+ // 2) "Schiffahrt" turns into
"Schiff-fahrt"
+ //
+ // In case 1 we need to replace a
char
+ // In case 2 we add a char
+ //
+ // Correct recognition is made
harder by words such as
+ // "Schiffahrtsbrennesseln", as
the Hyphenator splits all
+ // positions of the word and comes
up with "Schifffahrtsbrennnesseln"
+ // Thus, we cannot infer the aWord
from the AlternativWord's
+ // index.
+ // TODO: The whole junk will be
made easier by a function in
+ // the Hyphenator, as soon as AMA
adds it.
sal_uInt16 nAltStart = _nWordLen -
1;
sal_uInt16 nTxtStart = nAltStart -
(aAlt.Len() - aWord.Len());
sal_uInt16 nTxtEnd = nTxtStart;
sal_uInt16 nAltEnd = nAltStart;
- // Die Bereiche zwischen den
nStart und nEnd ist
- // die Differenz zwischen
Alternativ- und OriginalString.
+ // The area between nStart and
nEnd is the difference
+ // between AlternativString and
OriginalString
while( nTxtEnd < aWord.Len() &&
nAltEnd < aAlt.Len() &&
aWord.GetChar(nTxtEnd) !=
aAlt.GetChar(nAltEnd) )
{
@@ -4806,7 +4799,7 @@ long OutputDevice::ImplGetTextLines(
ImplMultiTextLineInfo& rLineInfo,
++nAltEnd;
}
- // Wenn ein Zeichen hinzugekommen
ist, dann bemerken wir es jetzt:
+ // If a char was added, we notice
it now:
if( nAltEnd > nTxtEnd && nAltStart
== nAltEnd &&
aWord.GetChar( nTxtEnd ) ==
aAlt.GetChar(nAltEnd) )
{
@@ -4815,7 +4808,7 @@ long OutputDevice::ImplGetTextLines(
ImplMultiTextLineInfo& rLineInfo,
++nTxtEnd;
}
- DBG_ASSERT( ( nAltEnd - nAltStart
) == 1, "Alternate: Falsche Annahme!" );
+ DBG_ASSERT( ( nAltEnd - nAltStart
) == 1, "Alternate: Wrong assumption!" );
if ( nTxtEnd > nTxtStart )
cAlternateReplChar =
aAlt.GetChar( nAltStart );
@@ -4824,10 +4817,10 @@ long OutputDevice::ImplGetTextLines(
ImplMultiTextLineInfo& rLineInfo,
if ( cAlternateReplChar )
nBreakPos++;
}
- } // if (xHyphWord.is())
- } // if ( ( nWordEnd >= nSoftBreak ) && (
nWordLen > 3 ) )
- } // if ( xHyph.is() )
- } // if ( (nStyle & TEXT_DRAW_WORDBREAK_HYPHENATION)
== TEXT_DRAW_WORDBREAK_HYPHENATION )
+ }
+ }
+ }
+ }
}
nLineWidth = _rLayout.GetTextWidth( rStr, nPos,
nBreakPos-nPos );
}
@@ -5638,7 +5631,7 @@ bool OutputDevice::GetCaretPositions( const OUString&
rStr, sal_Int32* pCaretXAr
// if requested move caret position to cell limits
if( bCellBreaking )
{
- ; // TODO
+ ; // FIXME
}
return true;
@@ -5760,7 +5753,6 @@ ImplLayoutArgs OutputDevice::ImplPrepareLayoutArgs(
OUString& rStr,
bRightAlign = true;
// SSA: hack for western office, ie text get right aligned
// for debugging purposes of mirrored UI
- //static const char* pEnv = getenv( "SAL_RTL_MIRRORTEXT" );
bool bRTLWindow = IsRTLEnabled();
bRightAlign ^= bRTLWindow;
if( bRightAlign )
@@ -5922,8 +5914,8 @@ SalLayout*
OutputDevice::getFallbackFontThatFits(ImplFontEntry &rFallbackFont,
pFallback->AdjustLayout( rLayoutArgs );
- //All we care about here is getting the vertical bounds of this text and
- //make sure it will fit inside the available space
+ // All we care about here is getting the vertical bounds of this text and
+ // make sure it will fit inside the available space
Point aPos;
for( int nStart = 0;;)
{
@@ -5944,7 +5936,7 @@ SalLayout*
OutputDevice::getFallbackFontThatFits(ImplFontEntry &rFallbackFont,
}
}
- //Shrink it down if it won't fit
+ // Shrink it down if it won't fit
if (bHaveBounding)
{
long nGlyphsAscent = -aBoundRect.Top();
@@ -6208,12 +6200,6 @@ void OutputDevice::ImplDrawText( OutputDevice&
rTargetDevice, const Rectangle& r
{
// draw disabled text always without shadow
// as it fits better with native look
- /*
- SetTextColor( GetSettings().GetStyleSettings().GetLightColor() );
- Rectangle aRect = rRect;
- aRect.Move( 1, 1 );
- DrawText( aRect, rOrigStr, nStyle & ~TEXT_DRAW_DISABLE );
- */
rTargetDevice.SetTextColor(
rTargetDevice.GetSettings().GetStyleSettings().GetDisableColor() );
}
}
@@ -6236,7 +6222,7 @@ void OutputDevice::ImplDrawText( OutputDevice&
rTargetDevice, const Rectangle& r
const bool bDrawMnemonics =
!(rTargetDevice.GetSettings().GetStyleSettings().GetOptions() &
STYLE_OPTION_NOMNEMONICS) && !pVector;
- // Mehrzeiligen Text behandeln wir anders
+ // We treat multiline text differently
if ( nStyle & TEXT_DRAW_MULTILINE )
{
@@ -6258,12 +6244,12 @@ void OutputDevice::ImplDrawText( OutputDevice&
rTargetDevice, const Rectangle& r
{
if ( nStyle & TEXT_DRAW_ENDELLIPSIS )
{
- // Letzte Zeile zusammenbauen und kuerzen
+ // Create last line and shorten it
nFormatLines = nLines-1;
pLineInfo = aMultiLineInfo.GetLine( nFormatLines );
aLastLine =
convertLineEnd(aStr.Copy(pLineInfo->GetIndex()), LINEEND_LF);
- // Alle LineFeed's durch Spaces ersetzen
+ // Replace all LineFeeds with Spaces
xub_StrLen nLastLineLen = aLastLine.Len();
for ( i = 0; i < nLastLineLen; i++ )
{
@@ -6281,30 +6267,30 @@ void OutputDevice::ImplDrawText( OutputDevice&
rTargetDevice, const Rectangle& r
nStyle &= ~TEXT_DRAW_CLIP;
}
- // Muss in der Hoehe geclippt werden?
+ // Do we need to clip the height?
if ( nFormatLines*nTextHeight > nHeight )
nStyle |= TEXT_DRAW_CLIP;
- // Clipping setzen
+ // Set clipping
if ( nStyle & TEXT_DRAW_CLIP )
{
rTargetDevice.Push( PUSH_CLIPREGION );
rTargetDevice.IntersectClipRegion( rRect );
}
- // Vertikales Alignment
+ // Vertical alignment
if ( nStyle & TEXT_DRAW_BOTTOM )
aPos.Y() += nHeight-(nFormatLines*nTextHeight);
else if ( nStyle & TEXT_DRAW_VCENTER )
aPos.Y() += (nHeight-(nFormatLines*nTextHeight))/2;
- // Font Alignment
+ // Font alignment
if ( eAlign == ALIGN_BOTTOM )
aPos.Y() += nTextHeight;
else if ( eAlign == ALIGN_BASELINE )
aPos.Y() += rTargetDevice.GetFontMetric().GetAscent();
- // Alle Zeilen ausgeben, bis auf die letzte
+ // Output all lines except for the last one
for ( i = 0; i < nFormatLines; i++ )
{
pLineInfo = aMultiLineInfo.GetLine( i );
@@ -6341,12 +6327,11 @@ void OutputDevice::ImplDrawText( OutputDevice&
rTargetDevice, const Rectangle& r
}
- // Gibt es noch eine letzte Zeile, dann diese linksbuendig
ausgeben,
- // da die Zeile gekuerzt wurde
+ // If there still is a last line, we output it left-aligned as the
line would be clipped
if ( aLastLine.Len() )
_rLayout.DrawText( aPos, aLastLine, 0, STRING_LEN, pVector,
pDisplayText );
- // Clipping zuruecksetzen
+ // Reset clipping
if ( nStyle & TEXT_DRAW_CLIP )
rTargetDevice.Pop();
}
@@ -6355,7 +6340,7 @@ void OutputDevice::ImplDrawText( OutputDevice&
rTargetDevice, const Rectangle& r
{
long nTextWidth = _rLayout.GetTextWidth( aStr, 0, -1 );
- // Evt. Text kuerzen
+ // Clip text if needed
if ( nTextWidth > nWidth )
{
if ( nStyle & TEXT_DRAW_ELLIPSIS )
@@ -6389,9 +6374,9 @@ void OutputDevice::ImplDrawText( OutputDevice&
rTargetDevice, const Rectangle& r
else if ( nStyle & TEXT_DRAW_VCENTER )
aPos.Y() += (nHeight-nTextHeight)/2;
- long nMnemonicX = 0;
- long nMnemonicY = 0;
- long nMnemonicWidth = 0;
+ long nMnemonicX = 0;
+ long nMnemonicY = 0;
+ long nMnemonicWidth = 0;
if ( nMnemonicPos != STRING_NOTFOUND )
{
sal_Int32* pCaretXArray = (sal_Int32*) alloca( 2 *
sizeof(sal_Int32) * aStr.Len() );
@@ -6720,7 +6705,7 @@ OUString OutputDevice::ImplGetEllipsisString( const
OutputDevice& rTargetDevice,
else if ( nStyle & TEXT_DRAW_NEWSELLIPSIS )
{
static sal_Char const pSepChars[] = ".";
- // Letztes Teilstueck ermitteln
+ // Determine last section
sal_Int32 nLastContent = aStr.getLength();
while ( nLastContent )
{
@@ -6749,7 +6734,7 @@ OUString OutputDevice::ImplGetEllipsisString( const
OutputDevice& rTargetDevice,
while ( (nFirstContent < nLastContent) &&
ImplIsCharIn( aStr[ nFirstContent ], pSepChars ) )
nFirstContent++;
- //MEM continue here
+ // MEM continue here
if ( nFirstContent >= nLastContent )
aStr = OutputDevice::ImplGetEllipsisString( rTargetDevice,
aStr, nMaxWidth, nStyle | TEXT_DRAW_ENDELLIPSIS, _rLayout );
else
@@ -6847,7 +6832,7 @@ void OutputDevice::DrawCtrlText( const Point& rPos, const
XubString& rStr,
// #106952#
// may occur in BiDi-Strings: the '~' is sometimes found
behind the last char
// due to some strange BiDi text editors
- // ->place the underline behind the string to indicate a
failure
+ // -> place the underline behind the string to indicate a
failure
bInvalidPos = sal_True;
nMnemonicPos = nLen-1;
}
@@ -7561,11 +7546,9 @@ sal_Bool OutputDevice::GetTextOutlines(
::basegfx::B2DPolyPolygonVector& rVector
if( bRet || (OUTDEV_PRINTER == meOutDevType) || !mpFontEntry )
return bRet;
- // fall back to bitmap conversion
------------------------------------------
-
+ // fall back to bitmap conversion
// Here, we can savely assume that the mapping between characters and
glyphs
// is one-to-one. This is most probably valid for the old bitmap fonts.
-
// fall back to bitmap method to get the bounding rectangle,
// so we need a monochrome virtual device with matching font
pSalLayout = ImplLayout( rStr, nIndex, nLen, Point(0,0), nTWidth, pDXArray
);
@@ -7626,8 +7609,8 @@ sal_Bool OutputDevice::GetTextOutlines(
::basegfx::B2DPolyPolygonVector& rVector
bRet = true;
bool bRTL = false;
OUString aStr( rStr ); // prepare for e.g. localized digits
- sal_Int32 nIndex2 = nIndex; // only needed until nIndex is sal_Int32
- sal_Int32 nLen2 = nLen; // only needed until nLen is sal_Int32
+ sal_Int32 nIndex2 = nIndex; // only needed until nIndex is sal_Int32
+ sal_Int32 nLen2 = nLen; // only needed until nLen is sal_Int32
ImplLayoutArgs aLayoutArgs = ImplPrepareLayoutArgs( aStr, nIndex2, nLen2,
0, NULL );
for( int nCharPos = -1; aLayoutArgs.GetNextPos( &nCharPos, &bRTL);)
{
@@ -7773,7 +7756,7 @@ sal_Bool OutputDevice::GetFontCharMap( FontCharMap&
rFontCharMap ) const
if( !mpFontEntry )
return sal_False;
-#ifdef ENABLE_IFC_CACHE // a little font charmap cache helps considerably
+#ifdef ENABLE_IFC_CACHE // a little font charmap cache helps considerably
static const int NMAXITEMS = 16;
static int nUsedItems = 0, nCurItem = 0;
@@ -7786,11 +7769,11 @@ sal_Bool OutputDevice::GetFontCharMap( FontCharMap&
rFontCharMap ) const
for( i = nUsedItems; --i >= 0; )
if( pFontData == aCache[i].mpFontData )
break;
- if( i >= 0 ) // found in cache
+ if( i >= 0 ) // found in cache
{
rFontCharMap.Reset( aCache[i].maCharMap.mpImpl );
}
- else // need to cache
+ else // need to cache
#endif // ENABLE_IFC_CACHE
{
const ImplFontCharMap* pNewMap = mpGraphics->GetImplFontCharMap();
diff --git a/vcl/source/gdi/print.cxx b/vcl/source/gdi/print.cxx
index 12b1841..a3a107b 100644
--- a/vcl/source/gdi/print.cxx
+++ b/vcl/source/gdi/print.cxx
@@ -59,8 +59,6 @@ using namespace com::sun::star::configuration;
int nImplSysDialog = 0;
-// =======================================================================
-
namespace
{
static Paper ImplGetPaperFormat( long nWidth100thMM, long nHeight100thMM )
@@ -70,8 +68,6 @@ namespace
return aInfo.getPaper();
}
-// -----------------------------------------------------------------------
-
static const PaperInfo& ImplGetEmptyPaper()
{
static PaperInfo aInfo(PAPER_USER);
@@ -79,7 +75,6 @@ namespace
}
}
-// =======================================================================
void ImplUpdateJobSetupPaper( JobSetup& rJobSetup )
{
@@ -103,10 +98,7 @@ void ImplUpdateJobSetupPaper( JobSetup& rJobSetup )
}
}
-// ------------------
-// - PrinterOptions -
-// ------------------
-
+// PrinterOptions
PrinterOptions::PrinterOptions() :
mbReduceTransparency( sal_False ),
meReducedTransparencyMode( PRINTER_TRANSPARENCY_AUTO ),
@@ -122,7 +114,6 @@ PrinterOptions::PrinterOptions() :
{
}
-// -----------------------------------------------------------------------
PrinterOptions::~PrinterOptions()
{
@@ -222,17 +213,13 @@ void Printer::SetPrinterOptions( const PrinterOptions&
i_rOptions )
*mpPrinterOptions = i_rOptions;
}
-// -------------
-// - QueueInfo -
-// -------------
-
+// QueueInfo
QueueInfo::QueueInfo()
{
mnStatus = 0;
mnJobs = 0;
}
-// -----------------------------------------------------------------------
QueueInfo::QueueInfo( const QueueInfo& rInfo ) :
maPrinterName( rInfo.maPrinterName ),
@@ -244,13 +231,11 @@ QueueInfo::QueueInfo( const QueueInfo& rInfo ) :
{
}
-// -----------------------------------------------------------------------
QueueInfo::~QueueInfo()
{
}
-// -----------------------------------------------------------------------
bool QueueInfo::operator==( const QueueInfo& rInfo ) const
{
@@ -263,7 +248,6 @@ bool QueueInfo::operator==( const QueueInfo& rInfo ) const
mnJobs == rInfo.mnJobs;
}
-// -----------------------------------------------------------------------
SvStream& operator<<( SvStream& rOStream, const QueueInfo& rInfo )
{
@@ -279,7 +263,6 @@ SvStream& operator<<( SvStream& rOStream, const QueueInfo&
rInfo )
return rOStream;
}
-// -----------------------------------------------------------------------
SvStream& operator>>( SvStream& rIStream, QueueInfo& rInfo )
{
@@ -295,7 +278,6 @@ SvStream& operator>>( SvStream& rIStream, QueueInfo& rInfo )
return rIStream;
}
-// =======================================================================
SalPrinterQueueInfo::SalPrinterQueueInfo()
{
@@ -304,13 +286,11 @@ SalPrinterQueueInfo::SalPrinterQueueInfo()
mpSysData = NULL;
}
-// -----------------------------------------------------------------------
SalPrinterQueueInfo::~SalPrinterQueueInfo()
{
}
-// -----------------------------------------------------------------------
ImplPrnQueueList::~ImplPrnQueueList()
{
@@ -322,7 +302,6 @@ ImplPrnQueueList::~ImplPrnQueueList()
}
}
-// -----------------------------------------------------------------------
void ImplPrnQueueList::Add( SalPrinterQueueInfo* pData )
{
@@ -346,7 +325,6 @@ void ImplPrnQueueList::Add( SalPrinterQueueInfo* pData )
}
}
-// -----------------------------------------------------------------------
ImplPrnQueueData* ImplPrnQueueList::Get( const OUString& rPrinter )
{
@@ -358,7 +336,6 @@ ImplPrnQueueData* ImplPrnQueueList::Get( const OUString&
rPrinter )
return pData;
}
-// =======================================================================
static void ImplInitPrnQueueList()
{
@@ -371,7 +348,6 @@ static void ImplInitPrnQueueList()
pSVData->mpDefInst->GetPrinterQueueInfo(
pSVData->maGDIData.mpPrinterQueueList );
}
-// -----------------------------------------------------------------------
void ImplDeletePrnQueueList()
{
@@ -385,17 +361,15 @@ void ImplDeletePrnQueueList()
}
}
-// -----------------------------------------------------------------------
const std::vector<OUString>& Printer::GetPrinterQueues()
{
- ImplSVData* pSVData = ImplGetSVData();
+ ImplSVData* pSVData = ImplGetSVData();
if ( !pSVData->maGDIData.mpPrinterQueueList )
ImplInitPrnQueueList();
return pSVData->maGDIData.mpPrinterQueueList->m_aPrinterList;
}
-// -----------------------------------------------------------------------
const QueueInfo* Printer::GetQueueInfo( const OUString& rPrinterName, bool
bStatusUpdate )
{
ImplSVData* pSVData = ImplGetSVData();
@@ -423,7 +397,6 @@ const QueueInfo* Printer::GetQueueInfo( const OUString&
rPrinterName, bool bStat
return NULL;
}
-// -----------------------------------------------------------------------
OUString Printer::GetDefaultPrinterName()
{
@@ -437,7 +410,6 @@ OUString Printer::GetDefaultPrinterName()
return OUString();
}
-// =======================================================================
void Printer::ImplInitData()
{
@@ -461,7 +433,7 @@ void Printer::ImplInitData()
mbIsQueuePrinter = sal_False;
mpPrinterOptions = new PrinterOptions;
- // Printer in die Liste eintragen
+ // Add printer to the list
ImplSVData* pSVData = ImplGetSVData();
mpNext = pSVData->maGDIData.mpFirstPrinter;
mpPrev = NULL;
@@ -472,7 +444,6 @@ void Printer::ImplInitData()
pSVData->maGDIData.mpFirstPrinter = this;
}
-// -----------------------------------------------------------------------
void Printer::ImplInit( SalPrinterQueueInfo* pInfo )
{
@@ -480,7 +451,7 @@ void Printer::ImplInit( SalPrinterQueueInfo* pInfo )
// #i74084# update info for this specific SalPrinterQueueInfo
pSVData->mpDefInst->GetPrinterQueueState( pInfo );
- // Testen, ob Treiber ueberhaupt mit dem JobSetup uebereinstimmt
+ // Test whether the driver actually matches the JobSetup
ImplJobSetup* pJobSetup = maJobSetup.ImplGetData();
if ( pJobSetup->mpDriverData )
@@ -494,11 +465,11 @@ void Printer::ImplInit( SalPrinterQueueInfo* pInfo )
}
}
- // Printernamen merken
+ // Remember printer name
maPrinterName = pInfo->maPrinterName;
maDriver = pInfo->maDriver;
- // In JobSetup den Printernamen eintragen
+ // Add printer name to JobSetup
pJobSetup->maPrinterName = maPrinterName;
pJobSetup->maDriver = maDriver;
@@ -520,14 +491,13 @@ void Printer::ImplInit( SalPrinterQueueInfo* pInfo )
return;
}
- // Daten initialisieren
+ // Init data
ImplUpdatePageData();
mpFontList = new ImplDevFontList();
mpFontCache = new ImplFontCache( sal_True );
mpGraphics->GetDevFontList( mpFontList );
}
-// -----------------------------------------------------------------------
void Printer::ImplInitDisplay( const Window* pWindow )
{
@@ -547,7 +517,6 @@ void Printer::ImplInitDisplay( const Window* pWindow )
mnDPIY = mpDisplayDev->mnDPIY;
}
-// -----------------------------------------------------------------------
SalPrinterQueueInfo* Printer::ImplGetQueueInfo( const OUString& rPrinterName,
const OUString* pDriver )
@@ -593,7 +562,6 @@ SalPrinterQueueInfo* Printer::ImplGetQueueInfo( const
OUString& rPrinterName,
return NULL;
}
-// -----------------------------------------------------------------------
void Printer::ImplUpdatePageData()
{
@@ -608,14 +576,12 @@ void Printer::ImplUpdatePageData()
maPaperSize.Width(), maPaperSize.Height() );
}
-// -----------------------------------------------------------------------
void Printer::ImplUpdateFontList()
{
ImplUpdateFontData( sal_True );
}
-// -----------------------------------------------------------------------
Printer::Printer()
{
@@ -631,7 +597,6 @@ Printer::Printer()
ImplInitDisplay( NULL );
}
-// -----------------------------------------------------------------------
Printer::Printer( const JobSetup& rJobSetup ) :
maJobSetup( rJobSetup )
@@ -651,7 +616,6 @@ Printer::Printer( const JobSetup& rJobSetup ) :
}
}
-// -----------------------------------------------------------------------
Printer::Printer( const QueueInfo& rQueueInfo )
{
@@ -664,7 +628,6 @@ Printer::Printer( const QueueInfo& rQueueInfo )
ImplInitDisplay( NULL );
}
-// -----------------------------------------------------------------------
Printer::Printer( const OUString& rPrinterName )
{
@@ -676,7 +639,6 @@ Printer::Printer( const OUString& rPrinterName )
ImplInitDisplay( NULL );
}
-// -----------------------------------------------------------------------
Printer::~Printer()
{
@@ -692,8 +654,8 @@ Printer::~Printer()
delete mpDisplayDev;
else
{
- // OutputDevice-Dtor versucht das gleiche, deshalb muss hier
- // der FontEntry auch auf NULL gesetzt werden
+ // OutputDevice Dtor is tryig the same thing; that why we need to set
+ // the FontEntry to NULL here
// TODO: consolidate duplicate cleanup by Printer and OutputDevice
if ( mpFontEntry )
{
@@ -715,7 +677,7 @@ Printer::~Printer()
// font list deleted by OutputDevice dtor
}
- // Printer aus der Liste eintragen
+ // Add printer from the list
ImplSVData* pSVData = ImplGetSVData();
if ( mpPrev )
mpPrev->mpNext = mpNext;
@@ -727,7 +689,6 @@ Printer::~Printer()
pSVData->maGDIData.mpLastPrinter = mpPrev;
}
-// -----------------------------------------------------------------------
void Printer::Compat_OldPrinterMetrics( bool bSet )
{
// propagate flag
@@ -738,7 +699,6 @@ void Printer::Compat_OldPrinterMetrics( bool bSet )
ImplUpdateFontData( sal_True );
}
-// -----------------------------------------------------------------------
sal_uLong Printer::GetCapabilities( sal_uInt16 nType ) const
{
@@ -751,7 +711,6 @@ sal_uLong Printer::GetCapabilities( sal_uInt16 nType ) const
return sal_False;
}
-// -----------------------------------------------------------------------
sal_Bool Printer::HasSupport( PrinterSupport eFeature ) const
{
@@ -780,7 +739,6 @@ sal_Bool Printer::HasSupport( PrinterSupport eFeature )
const
return sal_True;
}
-// -----------------------------------------------------------------------
sal_Bool Printer::SetJobSetup( const JobSetup& rSetup )
{
@@ -803,7 +761,6 @@ sal_Bool Printer::SetJobSetup( const JobSetup& rSetup )
return sal_False;
}
-// -----------------------------------------------------------------------
sal_Bool Printer::Setup( Window* pWindow )
@@ -841,7 +798,6 @@ sal_Bool Printer::Setup( Window* pWindow )
return sal_False;
}
-// -----------------------------------------------------------------------
sal_Bool Printer::SetPrinterProps( const Printer* pPrinter )
{
@@ -860,7 +816,7 @@ sal_Bool Printer::SetPrinterProps( const Printer* pPrinter )
if ( pPrinter->IsDisplayPrinter() )
{
- // Alten Printer zerstoeren
+ // Destroy old printer
if ( !IsDisplayPrinter() )
{
ImplReleaseGraphics();
@@ -891,12 +847,12 @@ sal_Bool Printer::SetPrinterProps( const Printer*
pPrinter )
mpInfoPrinter = NULL;
}
- // Neuen Printer bauen
+ // Construct new printer
ImplInitDisplay( NULL );
return sal_True;
}
- // Alten Printer zerstoeren?
+ // Destroy old printer?
if ( GetName() != pPrinter->GetName() )
{
ImplReleaseGraphics();
@@ -933,7 +889,7 @@ sal_Bool Printer::SetPrinterProps( const Printer* pPrinter )
mpInfoPrinter = NULL;
}
- // Neuen Printer bauen
+ // Construct new printer
OUString aDriver = pPrinter->GetDriverName();
SalPrinterQueueInfo* pInfo = ImplGetQueueInfo( pPrinter->GetName(),
&aDriver );
if ( pInfo )
@@ -950,7 +906,6 @@ sal_Bool Printer::SetPrinterProps( const Printer* pPrinter )
return sal_False;
}
-// -----------------------------------------------------------------------
sal_Bool Printer::SetOrientation( Orientation eOrientation )
{
@@ -987,14 +942,12 @@ sal_Bool Printer::SetOrientation( Orientation
eOrientation )
return sal_True;
}
-// -----------------------------------------------------------------------
Orientation Printer::GetOrientation() const
{
return maJobSetup.ImplGetConstData()->meOrientation;
}
-// -----------------------------------------------------------------------
sal_Bool Printer::SetPaperBin( sal_uInt16 nPaperBin )
{
@@ -1032,14 +985,12 @@ sal_Bool Printer::SetPaperBin( sal_uInt16 nPaperBin )
return sal_True;
}
-// -----------------------------------------------------------------------
sal_uInt16 Printer::GetPaperBin() const
{
return maJobSetup.ImplGetConstData()->mnPaperBin;
}
-// -----------------------------------------------------------------------
// Map user paper format to a available printer paper formats
void Printer::ImplFindPaperFormatForUserSize( JobSetup& aJobSetup, bool
bMatchNearest )
@@ -1052,7 +1003,7 @@ void Printer::ImplFindPaperFormatForUserSize( JobSetup&
aJobSetup, bool bMatchNe
PaperInfo aInfo(pSetupData->mnPaperWidth, pSetupData->mnPaperHeight);
- // Alle Papierformate vergleichen und ein passendes raussuchen
+ // Compare all paper formats and get the appropriate one
for ( int i = 0; i < nPaperCount; i++ )
{
const PaperInfo& rPaperInfo = GetPaperInfo( i );
@@ -1101,7 +1052,7 @@ void Printer::ImplFindPaperFormatForUserSize( JobSetup&
aJobSetup, bool bMatchNe
{
const PaperInfo& rPaperInfo = GetPaperInfo( i );
- // check protrait match
+ // check portrait match
sal_Int64 nDX = pSetupData->mnPaperWidth - rPaperInfo.getWidth();
sal_Int64 nDY = pSetupData->mnPaperHeight -
rPaperInfo.getHeight();
sal_Int64 nMatch = nDX*nDX + nDY*nDY;
@@ -1130,7 +1081,6 @@ void Printer::ImplFindPaperFormatForUserSize( JobSetup&
aJobSetup, bool bMatchNe
}
}
-// -----------------------------------------------------------------------
sal_Bool Printer::SetPaper( Paper ePaper )
{
@@ -1175,7 +1125,6 @@ sal_Bool Printer::SetPaper( Paper ePaper )
return sal_True;
}
-// -----------------------------------------------------------------------
sal_Bool Printer::SetPaperSizeUser( const Size& rSize )
{
@@ -1226,7 +1175,6 @@ sal_Bool Printer::SetPaperSizeUser( const Size& rSize,
bool bMatchNearest )
return sal_True;
}
-// -----------------------------------------------------------------------
int Printer::GetPaperInfoCount() const
{
@@ -1237,7 +1185,6 @@ int Printer::GetPaperInfoCount() const
return mpInfoPrinter->m_aPaperFormats.size();
}
-// -----------------------------------------------------------------------
OUString Printer::GetPaperName( Paper ePaper )
{
@@ -1269,7 +1216,6 @@ OUString Printer::GetPaperName( Paper ePaper )
return (it != pSVData->mpPaperNames->end()) ? it->second : OUString();
}
-// -----------------------------------------------------------------------
OUString Printer::GetPaperName( bool i_bPaperUser ) const
{
@@ -1280,7 +1226,6 @@ OUString Printer::GetPaperName( bool i_bPaperUser ) const
return (ePaper != PAPER_USER || i_bPaperUser ) ? GetPaperName( ePaper ) :
OUString();
}
-// -----------------------------------------------------------------------
const PaperInfo& Printer::GetPaperInfo( int nPaper ) const
{
@@ -1293,7 +1238,6 @@ const PaperInfo& Printer::GetPaperInfo( int nPaper ) const
return mpInfoPrinter->m_aPaperFormats[nPaper];
}
-// -----------------------------------------------------------------------
sal_Bool Printer::SetDuplexMode( DuplexMode eDuplex )
{
@@ -1330,21 +1274,18 @@ sal_Bool Printer::SetDuplexMode( DuplexMode eDuplex )
return sal_True;
}
-// -----------------------------------------------------------------------
int Printer::GetLandscapeAngle() const
{
return mpInfoPrinter ? mpInfoPrinter->GetLandscapeAngle(
maJobSetup.ImplGetConstData() ) : 900;
}
-// -----------------------------------------------------------------------
Paper Printer::GetPaper() const
{
return maJobSetup.ImplGetConstData()->mePaperFormat;
}
-// -----------------------------------------------------------------------
sal_uInt16 Printer::GetPaperBinCount() const
{
@@ -1354,7 +1295,6 @@ sal_uInt16 Printer::GetPaperBinCount() const
return (sal_uInt16)mpInfoPrinter->GetPaperBinCount(
maJobSetup.ImplGetConstData() );
}
-// -----------------------------------------------------------------------
OUString Printer::GetPaperBinName( sal_uInt16 nPaperBin ) const
{
@@ -1367,7 +1307,6 @@ OUString Printer::GetPaperBinName( sal_uInt16 nPaperBin )
const
return ImplGetSVEmptyStr();
}
-// -----------------------------------------------------------------------
sal_Bool Printer::SetCopyCount( sal_uInt16 nCopy, sal_Bool bCollate )
{
@@ -1376,14 +1315,12 @@ sal_Bool Printer::SetCopyCount( sal_uInt16 nCopy,
sal_Bool bCollate )
return sal_True;
}
-// -----------------------------------------------------------------------
void Printer::Error()
{
maErrorHdl.Call( this );
}
-// -----------------------------------------------------------------------
sal_uLong Printer::ImplSalPrinterErrorCodeToVCL( sal_uLong nError )
@@ -1405,7 +1342,6 @@ sal_uLong Printer::ImplSalPrinterErrorCodeToVCL(
sal_uLong nError )
return nVCLError;
}
-// -----------------------------------------------------------------------
sal_Bool Printer::EndJob()
{
@@ -1429,9 +1365,9 @@ sal_Bool Printer::EndJob()
mbDevOutput = sal_False;
bRet = mpPrinter->EndJob();
- // Hier den Drucker nicht asyncron zerstoeren, da es
- // W95 nicht verkraftet, wenn gleichzeitig gedruckt wird
- // und ein Druckerobjekt zerstoert wird
+ // FIXME: Do not destroy the printer asynchronously as Win95
+ // can't handle destroying a printer object and printing
+ // at the same time
ImplGetSVData()->mpDefInst->DestroyPrinter( mpPrinter );
mpPrinter = NULL;
}
@@ -1439,7 +1375,6 @@ sal_Bool Printer::EndJob()
return bRet;
}
-// -----------------------------------------------------------------------
void Printer::ImplStartPage()
{
@@ -1466,7 +1401,6 @@ void Printer::ImplStartPage()
}
}
-// -----------------------------------------------------------------------
void Printer::ImplEndPage()
{
@@ -1486,7 +1420,6 @@ void Printer::ImplEndPage()
}
}
-// -----------------------------------------------------------------------
void Printer::updatePrinters()
{
_______________________________________________
Libreoffice-commits mailing list
libreoffice-comm...@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/libreoffice-commits
