Date: Fri, 14 Apr 2000 12:03:04 -0400 From: "Dan Harn" <[EMAIL PROTECTED]> Subject: 2.5 to 3.5 pin connection I want to transfer an image of my old 3.2 gig hard drive to my new 12 gig hard drive through my desktop. I have already used IBM's ontrack to get the L50 to recognize the entire drive. My problem is that the 12 has more pins than the 2.5 jumper has sockets. I have heard people have fried hard drives by making the incorrect connection and now I'm nervous. I know that the 3.5 to 2.5 connector is ok because the shop used it to make my old hd a slave drive to the desktop. After the connection is made, do I just have to go to the desktop bios setup program to get it to detect the new hdd? Dan Harn ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------UNSUBSCRIBE------- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe --------UNSUBSCRIBE DIGEST------ Use above but add DIGEST to the subject line... **************************************************************
