Date: Tue, 12 Sep 2000 13:35:34 -0500
From: David VanHorn <[EMAIL PROTECTED]>
Subject: Re: Cool applications for L70

At 06:28 AM 9/12/00 -0700, Jim Ferguson wrote:
>Date: Mon, 11 Sep 2000 23:44:18 -0400
>From: Jim Ferguson <[EMAIL PROTECTED]>
>Subject: Re: Cool applications for L70
>
>I have finally succeeded in fabricating a power plug for my Libretto 100 and
>wanted to do a direct connect to an automobile lighter plug. I was going 
>to use
>a 1.5A fuse and a diode.  Does it need a capacitor to help filter the
>alternator noise?  Or anything else??  Any advise appreciated.

I'd STRONGLY reccomend that you remove that diode, and use an 18V zener 
diode across the power leads, after the fuse. Power then would come in 
through the fuse, to the zener, then on to the lib.  The other side of the 
zener goes to ground.

This protects you from overvoltage and reverse polarity problems.

No filtering required, assuming your alternator isn't minutes from 
catastrophic failure :)

--
Where's dave? http://www.findu.com/cgi-bin/find.cgi?kc6ete-9





**************************************************************
http://libretto.basiclink.com - Libretto mailing list                
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ         
                 -------UNSUBSCRIBE-------                            
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe 
            --------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...                           
**************************************************************

Reply via email to