Date: Thu, 25 Jan 2001 15:52:48 -0000
From: "Wright, Chris" <[EMAIL PROTECTED]>
Subject: RE: Re / Repost: Problems with PCMCIA network adapter
> Subject: Problems with PCMCIA network adapter
> > libretto 50ct + win95 + ovislink 10MBit PCMCIA ethernet network adaptor
> >
> > After installing it with the ovislink drivers there are no hardware
> > conflict, win95 says that the device is working but I cannot be pinged
> > or ping another computer in my network.
> >
> > Though the network adaptor monitor the net properly and senses all
> > trafic (LED) it does not sense its on pings so I guess it does not ping
> > at all - except the librettto's own IP!
>
>
Couple of things you could try :
Verify the hardware is actually working first by getting rid of
TCP/IP from both machines and see if you can get file/print sharing running
ok over IPX.
If you're using an RJ45 crossover cable, swap the ends round. For
some bizarre reason my libretto will only talk to my libretto with the cable
round one way.
then ....
In TCP/IP properties make sure the subnet mask is 255.255.255.0 and
that no gateway is being used. Set up static IP addresses instead of
requesting dynamic ones from a server.
Chris.
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
