Date: Wed, 14 Feb 2001 00:11:19 -0500
From: "Ken Hansen" <[EMAIL PROTECTED]>
Subject: RE: using libretto HD in a desktop
You should get two bits to make this easy...
One, a 2.5" to 3.5" adapter, typically about $10 each - it
should allow you to set the drive as master/slave.
Two, you would want to get a removeable drive sled - this will
allow you to add/remove the drive from your desktop without
opening the case, these are typically $10-25, depending on
source.
HTH,
Ken
-----Original Message-----
From: Yeshiah Zalman [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 13, 2001 8:47 AM
To: Libretto
Subject: using libretto HD in a desktop
Date: Tue, 13 Feb 2001 08:39:44 -0500
From: "Yeshiah Zalman" <[EMAIL PROTECTED]>
Subject: using libretto HD in a desktop
How would I go about using libretto HD in a desktop? for
example, to restore
backup OS to a new HD after the old one crashed.
What kind (and where) of connector to attatch the 2.5" to the
ribbon cable
of the desktop's 3.5" system.
Second: How do i setup the libretto drive as a slave. where are
the jumpers
and what are the settings.
Yeshiah
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
