Date: Sat, 17 Mar 2001 16:35:04 +0900 From: [EMAIL PROTECTED] Subject: Re: FDD Arnold, If I recall correctly, PA2940U shipped with Libretto 110. It has a detachable PCMCIA card which is flat, i.e. it can be used in a bottom part of a 1x Type III/2x TypeII slot without obstructing the upper slot. What is the problem with it? I thought that there was not much difference between Libretto 100 and 110. PA2612U or PA2612UJ should work with Model 60, 70, 100, 110, according to the information I collected over time. I think the PCMCIA card is attached and has an extension that curves upwards that would obstruct the upper slot if used in the lower slot. /ken -------- Original Message -------- Subject: FDD Date: Fri, 16 Mar 2001 19:32:12 -0800 From: "arnold.s milstein" <[EMAIL PROTECTED]> Reply-To: Libretto <[EMAIL PROTECTED]> To: Libretto <[EMAIL PROTECTED]> Date: Fri, 16 Mar 2001 22:25:38 -0500 From: "arnold.s milstein" <[EMAIL PROTECTED]> Subject: FDD I have a Lib 100 with a none working fdd model PA2940U. Will the PA2612U fdds I found on Ebay work with the 100? Arnold Milstein ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------UNSUBSCRIBE------- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe --------UNSUBSCRIBE DIGEST------ Use above but add DIGEST to the subject line... ************************************************************** ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------UNSUBSCRIBE------- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe --------UNSUBSCRIBE DIGEST------ Use above but add DIGEST to the subject line... **************************************************************