Date: Tue, 27 Mar 2001 09:25:53 -0600
From: "Shawn Fitzgerald" <[EMAIL PROTECTED]>
Subject: Subject: 110 enhanced port replicator problem


DDL, 

In your new port replicators do you have PCMCIA support? And does it have a drive in 
it? And is the drive set to slave? And does you old PortRep not have or have different 
PCMCIA support?  Is it Win98 1st or 2nd edition?

I had a problem with my 70ct using a PCMCIA drive, and it couldn't tell which drive 
was the master and which to boot from.  If I put the drive in after boot then all is 
well.  While this may not be exactly your problem you may have an issue with one of 
the other ports like the monitor, or serial ports.  I was using 1st edition of Win98.

Hope that helped
-Sfitz


DDL Wrote:
------------------------------------
I'm having a funny problem with an enhanced port replicator that I
just bought.  I exchanged it once, but the new one does the same thing. However, a 
slightly older one that I have access to works fine.

The two new docks that display these problems have serial numbers beginning with X8.  
The older one that works perfectly no matter how many times I reset it, power-cycle 
it, or leave it running for hours has a serial number beginning with 98.  The Libretto 
by itself never shows any such problems.  I have tried updating the Libretto BIOS to 
several versions including 8.00, but it has not helped.

---
Never use UBID online auction unless you like stress.



Get 250 color business cards for FREE! at Lycos Mail
http://mail.lycos.com/freemail/vistaprint_index.html




**************************************************************
http://libretto.basiclink.com - Libretto mailing list                
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ         
                 -------UNSUBSCRIBE-------                            
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe 
            --------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...                           
**************************************************************

Reply via email to