Date: Tue, 27 Mar 2001 08:08:40 -0800
From: "Marc @ American Elevator" <[EMAIL PROTECTED]>
Subject: Re: 110 enhanced port replicator problem
I used to use an EPR daily with my 'old' 100. It setup the 2nd hardware profile
automatically the first time I used it and really, it was trouble-free. Although I
never did get the boot screen with the dock image you mentioned, Dan.
When I upgraded to a 110, I tried the same EPR I was using with the 100, EPR Model No.
PA2719U, Serial No. 58015836, and now I get this strange hissing noise from the 110's
speaker whenever I put a PCMCIA card in the dock. I have tried deleting the dock
hardware profile, checking the volume(s) when on dock profile and everything else I
can think of and have had to abandon using it because of the noise. I have also
checked, and there are no reptiles living inside the unit that I can see.
What-o-what could this bee?
Marc Vendetti
[EMAIL PROTECTED]
----- Original Message -----
From: Dan Lanciani
To: Libretto
Sent: Monday, March 26, 2001 11:33 PM
Subject: 110 enhanced port replicator problem
Date: Tue, 27 Mar 2001 02:26:37 -0500 (EST)
From: Dan Lanciani <[EMAIL PROTECTED]>
Subject: 110 enhanced port replicator problem
I'm having a funny problem with an enhanced port replicator that I
just bought. I exchanged it once, but the new one does the same thing.
However, a slightly older one that I have access to works fine.
Often when I attempt to power on the Libretto in the dock the power
light comes on but the disk light does not, and the system just sits
there for as long as I have cared to wait. It doesn't even put up
the Toshiba screen (which normally comes after one or two blinks of
the disk light.) The reset button has no effect unless I first power
down the dock. With power removed from the dock, the reset button causes
the system to display the Toshiba screen (without the picture of the
dock) and come up. The reset button itself also often provokes the hang
if the dock is powered on.
The problem seems to come in several levels of intensity. At first I
though it might be heat related, but sometimes it works hot and fails
when cool. When the system is being most cooperative several power cycles
will work, but a reset will often hang. When it is being less cooperative
only one in several power cycles will work without hanging and every reset
will hang unless the power to the dock is off. Sometimes the Toshiba screen
with dock picture is corrupt with extra red pixels here and there, and
"Starting Windows 98" comes up as "arting Windows 98." Usually once DOS
or Windows is running everything seems to be fine, but sometimes the Windows
screen becomes corrupt and Windows hangs (even here powering down the dock
seems to unhang Windows, though it crashes soon thereafter).
The two new docks that display these problems have serial numbers beginning
with X8. The older one that works perfectly no matter how many times I
reset it, power-cycle it, or leave it running for hours has a serial
number beginning with 98. The Libretto by itself never shows any such
problems. I have tried updating the Libretto BIOS to several versions
including 8.00, but it has not helped.
Has anyone seen anything like this? Could the newer docks be somehow
slightly incompatible with an "older" 110? (It can't be much older as
neither the computer nor the dock was made for too long.) I don't know
to what extent the computer's internal bus is extruded out through the
expansion connector, but it almost feels like a bus timing issue.
I vaguely remember something that suggested that the dock has some non-volatile
configuration memory. The note talked about changing a dock's identification
number so Windows could associate two different hardware configurations with
two different docks. Unfortunately, I can't find this note anymore. If there
is non-volatile memory, perhaps it is somehow misconfigured?
Dan Lanciani
[EMAIL PROTECTED]
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************