Date: Thu, 12 Jul 2001 00:39:45 -0400
From: "Jack Schudel" <[EMAIL PROTECTED]>
Subject: Re: Enhanced Port Replicator EPR Help
It took me a couple of tries to get mine working.
(I plugged the power adapter into a switched outlet, but neglected to
turn it on.)
The other problem was that I had to do a full windows shutdown and power
off
before the system found the pcmcia slots.
/jack
-----Original Message-----
From: Roger McPherson <[EMAIL PROTECTED]>
To: Libretto <[EMAIL PROTECTED]>
Date: Wednesday, July 11, 2001 11:24 PM
Subject: Enhanced Port Replicator EPR Help
>Date: Wed, 11 Jul 2001 20:18:41 -0700 (PDT)
>From: Roger McPherson <[EMAIL PROTECTED]>
>Subject: Enhanced Port Replicator EPR Help
>
>Hello all,
>
>I just purchased an Enhanced Port Replicator for my
>Toshiba 110CT. I unboxed the unit, connected it to my
>Libretto, turned the unit on, and it went right into
>Windows 98. The problem is that it did not "find any
>hardware" (i.e. PCMCIA sockets, USB, etc). When I
>plug a PCMCIA card into one of the sockets on the
>replicator, I do not get any beeps at all! I do not
>have a USB device as of yet to test, but there is not
>anything new in device manager to indicate that it
>"sees" a USB controller.
>
>Do I need some special drivers for the enchanced port
>replicator to turn on the PCMCIA sockets and the USB?
>Also, does anyone know if the port replicator is
>supposed to turn off the sockets in the libretto, or
>will I have four sockets?
>
>Any help will be appreciated!!
>
>Thank You.
>Charles
>
>__________________________________________________
>Do You Yahoo!?
>Get personalized email addresses from Yahoo! Mail
>http://personal.mail.yahoo.com/
>
>
>
>
>**************************************************************
>http://libretto.basiclink.com - Libretto mailing list
>http://libretto.basiclink.com/archive - Archives
>http://www.picante.com/~gtaylor/portable/faq.html - FAQ
> -------UNSUBSCRIBE-------
>mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
> --------UNSUBSCRIBE DIGEST------
>Use above but add DIGEST to the subject line...
>**************************************************************
>
>
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
