Date: Thu, 26 Jul 2001 15:27:39 -0700
From: "Tom Stangl, VFAQman" <[EMAIL PROTECTED]>
Subject: Re: CT50 and 20G drives -=*SORTED*=-
neil barnes wrote:
> Date: Thu, 26 Jul 2001 17:58:49
> From: "neil barnes" <[EMAIL PROTECTED]>
> Subject: RE: CT50 and 20G drives -=*SORTED*=-
>
> Ok folks, here's the biz...
>
> The CT50, overclocked using the bus multiplier to 100MHz, will *not* operate
> correctly with the IBM 20G drive. The disk testing software which comes with
> the big disk manager from IBM reports the fault as a faulty cable (!) from
> which I can only assume that some odd timing quirk is upsetting the drive.
That's what mine reported.
> At 75M, or at 100M using the CPU multiplier, it works fine.
>
> The system allocates all the way to cylinder 1023 if allowed to so I've left
> space immediately after that for hibernation. Haven't tested hibernation yet
> though.
>
> All I need now is for someome (Pres?) to tell me again which file is needed
> to make W98 see the floppy...
Download the floppy driver from the Toshiba site. I think it's listed under the
70CT. I seem to remember it may have even been a 100CT file, but it works on
the 50.
--
Tom Stangl
***http://www.vfaq.com/
***DSM Visual FAQ home
***http://ba.dsm.org/
***SF Bay Area DSMs
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
