Date: Sat, 28 Jul 2001 06:01:11
From: "neil barnes" <[EMAIL PROTECTED]>
Subject: Re: CT50 and 20G drives -=*SORTED*=-

Yes, lose the clear plastic spacers. But removing the blue foam isn't a bad 
idea as it's still pretty tight in there if you leave them in...

Neil


>From: Dan Baker <[EMAIL PROTECTED]>
>Reply-To: Libretto <[EMAIL PROTECTED]>
>To: Libretto <[EMAIL PROTECTED]>
>Subject: Re: CT50 and 20G drives -=*SORTED*=-
>Date: Fri, 27 Jul 2001 14:55:44 -0700
>
>Date: Sat, 28 Jul 2001 07:51:19 +1000
>From: Dan Baker <[EMAIL PROTECTED]>
>Subject: Re: CT50 and 20G drives -=*SORTED*=-
>
>David,
>                Don't you leave the foam spacers and get rid of the two
>hard clear plastic spacers? I thougt the foam was to help reduce shock?
>
>Regards,
>                Dan Baker.
>
>P.S. Did the pouch fit the camera? I never heard back from you?
>
>David Chien wrote:
>
> > Date: Fri, 27 Jul 2001 10:58:55 -0700 (PDT)
> > From: David Chien <[EMAIL PROTECTED]>
> > Subject: Re: CT50 and 20G drives -=*SORTED*=-
> >
> >> notebook upgrades that im wondering what to do with.  Could these 9.5mm 
>5gb
> >> IBM
> >> travelstar drives be used in Libretto 50ct's?
> >
> >
> >   Yes. Esp. if it's on my list of all compatible HDs for the Libretto 
>(see my
> > site below, huge list).  9.5mm already says it'll work 99.999% sure.
> >
> >   Time for an easy HD upgrade!
> >
> >   eg. unscrew two screws on the HD plate, pull HD out, remove HD handle 
>and put
> > onto new HD, push new HD in and off you go.
> >
> >   IMPORTANT NOTE: On the L50 models, the baby won't like a 9.5mm HD too 
>much
> > until you take it apart and remove the foam spacers around the HD bay 
>under the
> > black plastic sheeting you can see from the HD slot.  The L50 models 
>came with
> > 8.45mm HDs, and while a 9.5mm HD can fit w/o removing the spacers (many 
>have
> > done this by simply loosening the bottom screws a bit, squeeze the drive 
>in,
> > then retighten a touch) - the problem is that the RAM chips on the MB 
>just
> > above the HD area usually warp, then delaminate, leaving you with a 
>useless
> > dead libretto.  Once the foam spacers are gone, there's an extra 1mm of 
>space
> > that'll take the 9.5mm HDs w/o any problems at all.
> >
> >   My site for the exploded parts view to take apart the Libretto to get 
>rid of
> > the foam spacers.
> >
> >   d =)
> >
> > =====
> > adorable toshiba libretto
> > The latest news and information for the Toshiba Libretto owner.
> > http://www.silverace.com/libretto/
> >

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp




**************************************************************
http://libretto.basiclink.com - Libretto mailing list                
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ         
                 -------UNSUBSCRIBE-------                            
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe 
            --------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...                           
**************************************************************

Reply via email to