Date: Mon, 13 Aug 2001 20:22:58 +0200
From: "Robbert J. van Herksen" <[EMAIL PROTECTED]>
Subject: For the Libby Linux sound fans...
Get Sound to work in 16 bit mode, quite interesting for the Libby LINUX
users :
In the last 3 years I used only 8-bit sound using the SoundBlaster Pro
module, inserted by :
/sbin/modprobe sb io=0x220 irq=5 dma=3 dma16=5 mpu_io=0x300
It worked fine, but the sound quality was barely acceptable. However,
recently I found out that it is also possible to use 16 bit sound on the
Libretto !!! To use that you have to use another kernel module that I didn't
know about until recently and which is named the OPL3-SA2 driver.
/sbin/rmmod sb
/sbin/modprobe opl3sa2 io=0x220 mss_io=0x530 mpu_io=0x330 irq=5 dma=1 dma2=0
Note that the first dma is 1 and the second dma 0 and NOT the other way
round ...
Believe me: this makes an incredible difference in Sound quality. Finally my
MP3 files also sound perfectly well on the Libretto ;-)
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
