Date: Sat, 01 Sep 2001 01:04:50 +0000
From: "Matthew Hanson" <[EMAIL PROTECTED]>
Subject: Re: Infrared Monitor
>From: "Sundering Skies" <[EMAIL PROTECTED]>
>
>I assume you mean the BIOS setup?
"Setup', 'BIOS', 'CMOS'... yeah.
>I don't see an IR feature selection. Is
>the BIOS version important for that? I have version 6.40.
This was just a guess on my part. I've only used my 50CT that I've had
since Jan. 1998, and have never used the IR feature. But I remember a tech
once turned that feature OFF in BIOS. Every once in a while going through
my setup options I see it turned off there, and make a mental note to
remember that if I ever try to set something up that uses it.
You say that you have an 100CT. I guess Toshiba must have changed the BIOS
setup if you don't see it there. You have tabbed over each feature in BIOS
and looked at the submenus that pop each for some of the features, right?
Though I'm assuming that the 100CT's BIOS is set up lke the 50CT's. I could
be wrong.
I've frequently found that by removing devices from Device Manager, and then
rebooting a system (hopefully with IR set up to go in BIOS or otherwise) and
then booting it again with the W9X CD-ROM loaded and waiting, that the
device is frequently found and reconfigured.
But I'm surprised someone else on the list hasn't written back about this
issue. I've seen a lot of discussion on the topic.
Matt
>
>Shultz
>
>>From: "Matthew Hanson" <[EMAIL PROTECTED]>
>>
>>Is the IR feature enabled in you setup otions when you boot the system?
>>
>>
>>>From: "Sundering Skies" <[EMAIL PROTECTED]>
>>>Reply-To: Libretto <[EMAIL PROTECTED]>
>>>To: Libretto <[EMAIL PROTECTED]>
>>>Subject: Infrared Monitor
>>>Date: Thu, 30 Aug 2001 23:06:19 -0700
>>>
>>>Date: Fri, 31 Aug 2001 06:00:16 +0000
>>>From: "Sundering Skies" <[EMAIL PROTECTED]>
>>>Subject: Infrared Monitor
>>>
>>>Hi all,
>>>
>>>I want to use the IR port to connect my Nokia 8290 to my Lib100, but
>>>Infrared Monitor is not an item in my control panel. The IR port appears
>>>to
>>>be correctly installed in the Device Manager. When I tried TweakUI on
>>>the
>>>control panel however, Infrared Monitor does not show up, which makes me
>>>think that it was never installed. Is there a way to install that
>>>without
>>>having to reinstall WinME?
>>>
>>>Thanks,
>>>Shultz
>
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>
>
>
>
>**************************************************************
>http://libretto.basiclink.com - Libretto mailing list
>http://libretto.basiclink.com/archive - Archives
>http://www.picante.com/~gtaylor/portable/faq.html - FAQ
> -------UNSUBSCRIBE-------
>mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
> --------UNSUBSCRIBE DIGEST------
>Use above but add DIGEST to the subject line...
>**************************************************************
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
